| ₹ 2750.0 includes GST and import duties. | |
| B2B customers can avail ₹ 419.38 ITC on this product | |
| 100% Secure Payments | 100% Genuine product |
Description
Weaver 48227 Overview
The gloss black Top Mount Base #46 from Weaver has been machined to tight tolerances for a custom fit. The aluminum base offers maximum strength so that the rings will hold tight.
Compatibility
Rear base For:
Navy Arms Country Boy Muzzleloader
Savage Axis Series, 10, 12, 110, 112 (all long action Accutrigger); 10 ML II
Stevens Savage / Stevens 200
Winchester 52 (same hole spacing)
Front Base For:
Anschutz 1568
Beretta Mato Rifle
Browning Bolt Action BBR, Hi-Power, other calibers, older models, BBR Bolt Action, long and short actions
Churchill 950, 950-C, 972-C
Colt 57
Cooey 71
Enfield with receiver cut down like a Winchester 70
H&R 300, 301, 330, 370 (pre-1973); 300, 301 long action in 270, 30-06, 7mm; 300 Win (1973+)
Herters J9
High-Standard High-Power
Interarms Viscount
Marlin 455, MR7
1.4" diameter Mauser Receiver Ring 98FN, 1.3" diameter receiver ring (Swedish 96); Bauer 3000, 4000
Musgrave Mark I, II, III, IV
Navy Arms Country Boy Muzzleloader
Parker Hale 1000, 1000C, 1100, 1200, 1700
Savage Axis Series, 10, 12, 16 (short actions); Striker; Pistol; 510; 512; 516 (short action); 10 ML (2-piece only) pre-2003 models; 110, 112, 116 (long actions); 210 Shotgun (with X-high rings) pre-2003 models; 10, 12, 110, 112 (long action AccuTriggers); 10 ML II
Sears 50, 51, 51L, 53
Smith & Wesson Mauser Actions with 1.3" diameter small receiver ring
Stevens 110E, Savage / Stevens 200
Voere, 2165/1, 2165/2, 2165/3 & 2165/4 (Mauser action)
Weatherby FN Mauser-style actions
Winchester 52 (same hole spacing), 54, early models, 70 with serial number below #66 350, 70 Long Action (same hole spacing), 670, 770, 70 Long Action (different hole spacing), 70 Super Express, 70 Short Action (1984+), 70 WSM, 70 WSSM
Note: For Savage 10, 12, and 16 short actions; Striker; Pistol; 510; 512; 516 short action; 10 ML (2-piece only) pre-2003 models with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
Note: For Savage / Stevens 200 with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
Note: For 1.4" diameter Mauser Receiver Ring 98FN and 1.3" diameter Receiver Ring (Swedish 96) shimming is probably required for perfect scope alignment. The rear base may require modifications for correct fit to military actions.
Note: The Winchester 52 with the same hole spacing may require bolt and/or safety alterations to function safely and properly. Consult with a qualified gunsmith.
Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long Action rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. If the hole spacing is the same, then for model 52 use 46+ 46 and for model 52 use 25+ 57. If the hole spacing is different, then for model 70 use 47+ 46 and for model 70 use 49A+ 46.
Front Base For:
Note: For Savage 10, 12, and 16 short actions; Striker; Pistol; 510; 512; 516 short action; 10 ML (2-piece only) pre-2003 models with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
Note: For Savage / Stevens 200 with shorter tube scopes or red dot scopes use #402 extension front base or one-piece base if available. Extension base allows an extra 0.689".
Note: For 1.4" diameter Mauser Receiver Ring 98FN and 1.3" diameter Receiver Ring (Swedish 96) shimming is probably required for perfect scope alignment. The rear base may require modifications for correct fit to military actions.
Note: The Winchester 52 with the same hole spacing may require bolt and/or safety alterations to function safely and properly. Consult with a qualified gunsmith.
Note: The handiest way to pinpoint the correct base for the Winchester 52 & Winchester 70 Long Action rifles is to check the spacing of the tapped holes for the rear base and compare it to the hole spacing for the front base. If the hole spacing is the same, then for model 52 use 46+ 46 and for model 52 use 25+ 57. If the hole spacing is different, then for model 70 use 47+ 46 and for model 70 use 49A+ 46.
UPC: 076683482273
In the Box
- Weaver Top Mount Base #46 (Matte Black)
- Limited Lifetime Manufacturer Warranty
Weaver 48227 Specs
Packaging Info
| Package Weight |
0.1 lb
|
| Box Dimensions (LxWxH) |
9 x 3.4 x 0.2"
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 2695.0 |
| 3-5 | ₹ 2667.5 |
| 5-10 | ₹ 2612.5 |
| 10+ | ₹ 2557.5 |
Bulk discount will be automatically applied during checkout based on quantity.