| ₹ 118940.0 includes GST and import duties. | |
| B2B customers can avail ₹ 18138.35 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
The polar white G Three 2-Way Active Loudspeaker from Genelec is designed to produce broad bandwidth sound with high output and low coloration. The reflex port design helps in reducing the woofer�s displacement, improving the linear low frequency output capacity.
Audio input is via a 10 kOhm balanced female XLR connector or unbalanced RCA connector. Only line level audio signal from a preamplifier, computer sound card, or similar signal source can be connected. It is possible to connect two audio sources to the loudspeakers at the same time using both connectors, as long as only one source is used at a time. The playback level of the loudspeakers has two basic settings, normal and -10 dB. Bass and tone controls allow you to further customize or adjust the sound based on room placement.
The Iso-Pod (Isolation Positioner/Decoupler) vibration insulating table stand allows tilting the loudspeaker for correct vertical alignment. There are 3 mounting points for the Iso-Pod on the back of the loudspeaker cabinet allowing vertical and symmetrical horizontal positioning. On the base of the loudspeaker is a 3/8� UNC threaded hole compatible with a standard microphone stand. On the rear there are two sets of threaded holes for Omnimount and König & Meyer brackets.
The signal sensing Autostart function of the loudspeakers powers them up when playback begins. Automatic powering down of the loudspeakers happens one hour after the playback has ended and the loudspeakers go to standby mode. The power consumption in standby mode is less than 0.5W. The loudspeaker will automatically and rapidly start once an input signal is detected from the source.
Technologies
- Directivity Control Waveguide (DCW)
- Optimized amplifiers
- Active crossovers
- Room response compensation
- Protection circuitry
- Minimum Diffraction Enclosure (MDE)
- Reflex port design
- Intelligent signal sensing
| SPL | 104 dB |
| Frequency Response | 47 Hz to 25 kHz (-3 dB) Accuracy: ± 2.5 dB (54 Hz to 20 kHz) |
| Driver | Woofer: 5" / 127 mm Tweeter: 0.75" / 19.5 mm metal dome |
| Amplifier Power | Woofer 50 W + Tweeter 50 W |
| Connections | 1 x RCA analog input 1 x XLR analog input |
| Crossover | Input Impedance: 10 kOhm Crossover frequency, Bass/Treble: 3 kHz Treble Control Operating Range in 2 dB Steps: -2 dB @ 15 kHz Tabletop Low Frequency Control Operating Range: -4 dB @ 200 Hz Low Bass Control Operating Range: 4 dB @ 55 Hz Bass Control Operating Range in 2 dB Steps: From 0 to -6 dB @ 100 Hz |
| Amplifier | Bass/Treble Amplifier Short Term Output Power: 50 W each Amplifier System Distortion at Nominal Output (THD/SMPTE-IM/CCIF-IM/DIM 100): ?0.05 % Signal to Noise Ratio, Referred to Full Output (Bass/Treble): ?100 dB Mains Voltage: 100-240 VAC, 50/60 Hz, ±10% Power Consumption: <0.5 W (standby), 10 W (idle), 80 W (full output) |
| Dimensions | Height (Without Table Support): 11.81"(300 mm) Height (Including Table Support): 11.25"(285 mm) Width: 7.43"(189 mm) Depth: 7" (178 mm) |
| Weight | 11.2 lb (5.1 kg) |
| Packaging Info | |
|---|---|
| Package Weight | 15.7 lb |
| Box Dimensions (LxWxH) | 17.4 x 11.8 x 11.7" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 116561.2 |
| 3-5 | ₹ 115371.8 |
| 5-10 | ₹ 112993.0 |
| 10+ | ₹ 110614.2 |
Bulk discount will be automatically applied during checkout based on quantity.