| ₹ 36670.0 includes GST and import duties. | |
| B2B customers can avail ₹ 5592.18 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
RDL DS-TPS2AM Overview
Run your XLR mic and 3.5mm cables through the wall to your compatible equipment with the stainless steel RDL DS-TPS2AM XLR & 3.5mm Active Dual Twisted Pair Sender. It fits in wall boxes, cabinets, and US single-gang electrical boxes and features a 3-pin XLR female and a 3.5mm female input connector with two twisted pair Ethernet connectors on the rear.
Application
The DS-TPS2AM module features an XLR microphone input and a 3.5mm stereo input summed to mono. The unbalanced 3.5mm input is designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 VDC IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel gain switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for normal gain. If consistently low mic levels are expected, this switch may be set to the high gain position. The pre-amplified microphone source is routed to pair A; the buffered 3.5mm input is routed to output cable pair B.
Power Input
The DS-TPS2AM may be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DS-TPS2AM may be remotely powered through the twisted pair cable from any other module, signal distributor, or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
UPC: 813721014405
RDL DS-TPS2AM Specs
| Front Connections | 1 x Gold-Plated 3-Pin XLR Female 1 x 1/8" / 3.5 mm Female |
| Rear Connections | 2 x RJ45 Twisted Pair Ports (Format-A) 1 x Removable 2-Pin Terminal Block (Power) |
| Phantom Power | 24 VDC IEC via XLR Input |
| Input Impedance | Mic: 1.2 Kilohms Balanced with Phantom Power Line: 10 Kilohms |
| Input Level | Mic: -65 to -45 dBu Balanced; -40 dBu (Maximum, High Gain); -28 dBu (Maximum, Normal Gain) Line: -10 dBV Unbalanced; +8 dBV Maximum |
| Installation | Within a Wall Box, Cabinet, or Standard US Electrical Box |
| Frequency Response | Mic In: 100 Hz to 30 kHz, ±1 dB; Integral Low-Cut Filter -10 dB @ 30 Hz Line In: 20 Hz to 50 kHz, ±0.5 dB |
| THD + N | Mic In: <0.1% (80 Hz to 20 kHz) Line In: <0.05% (20 Hz to 50 kHz), <0.005% (1 kHz) |
| Noise | Mic, Below 4 dBu: <-80 dB (Normal Gain); <-70 dB (High Gain) Line: <-95 dB |
| Crosstalk | Line to Line: <90 dB (1 kHz); <75 dB (20 Hz to 20 kHz) Line to Mic (High Gain): <65 dB (1 kHz); <60 dB (20 Hz to 20 kHz) Line to Mic (Normal Gain): <75 dB (1 kHz); <70 dB (20 Hz to 20 kHz) |
| Headroom | Above 4 dBu: >18 dB |
| CMRR | Mic: >60 dB (High Gain, 50 Hz to 150 Hz); >65 dB (Normal Gain, 50 Hz to 150 Hz) |
| Construction Material | Stainless Steel |
| Mounting | Minimum Depth: 2.4" / 6.1 cm |
| Operating Temperature | 32 to 131°F / 0 to 55°C |
| Power Requirements | 24 VDC @ 65 mA Plus Connected Loads |
| Dimensions (WxHxD) | 1.6 x 1.89 x 4.11" / 4.06 x 4.8 x 10.45 cm |
| Weight | Not Specified by Manufacturer |
RDL DS-TPS2AM Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 35936.6 |
| 3-5 | ₹ 35569.9 |
| 5-10 | ₹ 34836.5 |
| 10+ | ₹ 34103.1 |
Bulk discount will be automatically applied during checkout based on quantity.