ProAm USA TK210 Overview
- 1 Description
- 2 ProAm USA Orion DVC200 8' Camera Crane/Jib
- 3 ProAm USA 4' Extension for DVC200 and DVC210 Camera Cranes
- 4 ProAm USA Camera Crane Stand Support
- 5 ProAm USA Camera Crane and Jib Carrying Bag
- 6 ProAm USA Iris 7" LCD Video Monitor
- 7 ProAm USA Canon BP Battery Plate for 12V Monitor/LED Light
- 8 ProAm USA Canon BP-915 Equivalent 2000mAh Battery & Charger
- 9 ProAm USA LCD Monitor Mounting Bracket and Ball Mount
- 10 ProAm USA 7" LCD Video Monitor Hood / Sunshade
- 11 ProAm USA 8" Hook-and-Loop Fastener Cable Ties (4-Pack)
The Orion DVC210 8' DSLR Camera Crane Production Package from ProAm USA is a ready-made jib arm solution for cameras weighing up to 10 lb. The package features the 8' DVC210 jib arm that provides a reach of 5' from its fulcrum, an aluminum stand to support the arm, and a 7" LCD monitor to monitor your shots as you operate. To mount the LCD monitor, a mounting bracket is included, along with a Canon LP-E6 plate, battery and charger to power it. Other monitor accessories include a 10' HDMI cable, hook-and-loop cable ties, and a sun hood. For storage, the 8' arm itself breaks down into two 4' pieces, allowing it to fit inside an included carrying bag for convenient storage and transport.
Note: Counterweights not included.
ProAm USA Orion DVC200 8' Camera Crane/Jib
Capture smooth, dynamic sweeping pans and camera rises with the Orion DVC200 8' Camera Crane/Jib from ProAm USA . Supporting loads up to 8 lb, the 8' arm adds 5' of reach from the fulcrum point, with an optional 4' extension available for additional length. It is constructed from 1" and 2" aluminum tubing, setting up quickly and without tools to benefit on-location productions. At the end of your shoot, the jib breaks down into two 4' long sections for easier travel and storage. To balance your load, a 1" counterweight bar at the rear of the arm accepts standard and readily available dumbbell weights.
Features
- 8' arm jib arm
- Supports loads up to 8 lb
- Adds 5' of reach from fulcrum
- Optional 4' extension bar for increased length
- Constructed from 6061 aluminum with powder-coated finish
- Stainless steel bearings for smooth motion
- Quick, tool-less setup
- Breaks down into two 4' sections for storage and travel
- Camera can auto-tilt to remain level, or use can remove a pin to manually tilt the camera
- 1" counterweight bar to hold standard dumbbell weights
- 1/4"-20 and 3/8"-16 tripod mounting thread
![]()
UPC: 728028003970
ProAm USA 4' Extension for DVC200 and DVC210 Camera Cranes
The 4' Extension from ProAm USA allows the 8' DVC200 and DVC210 Camera Cranes to be extended to 12'.
Note: This extension is only compatible with DVC200 models that were purchased AFTER March 12, 2007. While it allows the 8' model to have a 12' reach, it is NOT intended to bring the DVC250 to 16'.
![]()
UPC: 728028003994
ProAm USA Camera Crane Stand Support
The Camera Crane Stand Support from ProAm USA is a custom-built 4' to 6' support designed specifically for the ProAm camera crane line of products and is not intended for use with other crane brands. The stand's all-aluminum mount can hold up to 100 lb and features 360° panning motion. It can be used with any ProAm Camera Crane, including the 8' to 12' DVC210, 8' to 12' DVC200, DVC60, and DVC50 models.
![]()
UPC: 728028105452
ProAm USA Camera Crane and Jib Carrying Bag
The Camera Crane and Jib Carrying Bag from ProAm USA is a lightly padded and zippered carrying bag which securely stores and transports the DVC50, DVC60, DVC210, DVC300, DVC250, or DVC500 camera crane. It is made of durable padded canvas with nylon handle straps and has a large zippered pouch on the front.
![]()
UPC: 728028184099
ProAm USA Iris 7" LCD Video Monitor
Featuring a 7" 480 x 234-resolution TFT LCD panel, this Iris LCD Video Monitor from ProAm USA accepts standard-definition NTSC or PAL composite video sources for easy viewing. If your camera is mounted on a jib or a crane, a monitor is essential for checking your composition. This monitor is also useful mounted atop your camera. The 7" LCD provides more screen real estate than the LCDs available on most cameras. Having a larger screen makes it easier to check your composition as well as focus your camera's lens to ensure that your subject is consistently sharp.
The LCD panel is capable of displaying 16:9 footage as well as legacy 4:3 footage from older camcorders. You can also adjust the color, brightness, and contrast of the display to match your workflow. Audio from your camera can be played back through integrated stereo speakers or separately available headphones via the 3.5mm stereo jack. Mounting hardware for securing the monitor to a jib or the top of your DSLR or camcorder is included. For power, use the included battery mount for separately available Canon BP batteries, or use the included AC adapter and power cable. A wireless remote control is also included for making necessary adjustments on-the-fly.
Vertical and mirror image flipping
High output stereo speakers
480 x 234 resolution display
Attaches to camera's accessory shoe or to crane or tripod
Battery power lasts up to 5 hours (battery not included)
![]()
UPC: 728028003987
ProAm USA Canon BP Battery Plate for 12V Monitor/LED Light
Power your 12V monitor or LED light off a Canon battery with this Canon BP Battery Adapter Plate from ProAm USA . It uses a standard barrel jack connector for compatibility with most devices that will accept a 12V power source. The plate itself mounts to the rear of your device using the included touch fastener pads.
Converts camcorder battery to 12V
Up to five hours of power depending on battery
![]()
UPC: 728028195255
ProAm USA Canon BP-915 Equivalent 2000mAh Battery & Charger
The Canon BP-915 Equivalent 2000mAh Battery & Charger from ProAm USA is used for powering an LCD monitor when using the Canon BP series adapter plate. The battery can power an LCD monitor for up to 5 hours and can also be used for powering Canon XL series camcorders.
![]()
UPC: 728028207583
ProAm USA LCD Monitor Mounting Bracket and Ball Mount
Attach your LCD monitor to your crane with this Mounting Bracket and Ball Mount from ProAm USA in order to easily check your exposure and composition while your camera is mounted atop the crane. The mounting bracket itself is an L-bracket which secures to the side of the crane, while the included articulating ball mount secures the monitor to the L-bracket. The ball mount affixes to the bracket via a standard shoe mount, while the monitor is secured via the 1/4"-20 screw on top of the ball mount.
![]()
UPC: 013964711035
ProAm USA 7" LCD Video Monitor Hood / Sunshade
View your 7" monitor's screen in bright daylight with the ProAm USA 7" LCD Video Monitor Hood / Sunshade . Attaching via hook-and-loop straps, this hood is easy to apply and remove as needed, and folds for easy storage when not in use. The bottom layer is separate from the top and sides, so you can move it in order to minimize light leak. Since this hood only requires front-mounting, side controls will remain accessible while the hood is attached.
![]()
UPC: 728028023039
ProAm USA 8" Hook-and-Loop Fastener Cable Ties (4-Pack)
The 4-pack of 8" Hook-and-Loop Fastener Cable Ties from ProAm USA is designed to secure loose audio, video, or LANC cables. The cable ties can also be used on tripod legs to secure camera cables, or to keep loose cables out of the way of your camera shot. The cable ties are 8" in length.
![]()
UPC: 013964711097
In the Box
- ProAm USA Orion DVC200 8' Camera Crane/Jib
- Limited Lifetime Warranty
- ProAm USA 4' Extension for DVC200 and DVC210 Camera Cranes
- ProAm USA Camera Crane Stand Support
- ProAm USA Camera Crane and Jib Carrying Bag
- ProAm USA Iris 7" LCD Video Monitor
- ProAm USA Accessory Shoe Mount for LCD Monitors
- Remote Control
- AV Cable
- 6" RCA Extension Cable
- ProAm USA Canon BP Battery Plate for 12V Monitor/LED Light
- DC Power Connector
- Hook-and-Loop Fastener
- Tabletop Mounting Stand
- DC Car Power Adapter
- AC Adapter
- Limited 1-Year Warranty
- ProAm USA Canon BP Battery Plate for 12V Monitor/LED Light
- Set of Hook-and-Loop Fastener Tabs
- Limited 1-Year Warranty
- ProAm USA Canon BP-915 Equivalent 2000mAh Battery & Charger
- ProAm USA LCD Monitor Mounting Bracket and Ball Mount
- ProAm USA Accessory Shoe Mount for LCD Monitors
- Limited 1-Year Warranty
- ProAm USA 7" LCD Video Monitor Hood / Sunshade
- Set of Hook-and-Loop Fasteners
- Limited 1-Year Warranty
- ProAm USA 8" Hook-and-Loop Fastener Cable Ties (4-Pack)
Table of Contents
- Description
- ProAm USA Orion DVC200 8' Camera Crane/Jib
- ProAm USA 4' Extension for DVC200 and DVC210 Camera Cranes
- ProAm USA Camera Crane Stand Support
- ProAm USA Camera Crane and Jib Carrying Bag
- ProAm USA Iris 7" LCD Video Monitor
- ProAm USA Canon BP Battery Plate for 12V Monitor/LED Light
- ProAm USA Canon BP-915 Equivalent 2000mAh Battery & Charger
- ProAm USA LCD Monitor Mounting Bracket and Ball Mount
- ProAm USA 7" LCD Video Monitor Hood / Sunshade
- ProAm USA 8" Hook-and-Loop Fastener Cable Ties (4-Pack)
ProAm USA Orion DVC200 8' Camera Crane/Jib Specs
| Material | 6061 powered-coated aluminum |
| Load Capacity | 8 lb (3.6 kg) |
| Arm Reach | 5' (1.5 m) |
| Mounting Threads | 1/4"-20 and 3/8"-16 |
| Length | 8' (2.4 m) |
| Weight | 12 lb (5.4 kg) |
Packaging Info
| Package Weight | 15.35 lb |
| Box Dimensions (LxWxH) | 52.1 x 10 x 8" |
ProAm USA 4' Extension for DVC200 and DVC210 Camera Cranes Specs
| Compatibility | DVC200 and DVC210 camera cranes |
Packaging Info
| Package Weight | 6.3 lb |
| Box Dimensions (LxWxH) | 59 x 5 x 4.5" |
ProAm USA Camera Crane Stand Support Specs
| Compatibility | All ProAm camera cranes |
| Maximum Load Capacity | 100.0 lb (45.4 kg) |
| Height | Minimum: 4.0' (1.2 m)
Maximum: 6.0' (1.8 m) |
Packaging Info
| Package Weight | 8 lb |
| Box Dimensions (LxWxH) | 48 x 6.5 x 6.5" |
ProAm USA Camera Crane and Jib Carrying Bag Specs
| Compatible Models | DVC50, DVC60, DVC210, DVC300, 3-section DVC250 or DVC500 |
| Dimensions | 54.0 x 12.0 x 6.0" (137.2 x 30.5 x 15.2 cm) |
Packaging Info
| Package Weight | 2.5 lb |
| Box Dimensions (LxWxH) | 19.3 x 18.2 x 2" |
ProAm USA Iris 7" LCD Video Monitor Specs
| Resolution | 480 x 234 pixels |
| Inputs | RCA composite video with stereo audio |
| Outputs | Headphone jack
Integrated stereo speakers |
| Monitor Size | 7.0" (17.8 cm) |
| Battery Compatibility | Canon BP battery type |
Packaging Info
| Package Weight | 2.74 lb |
| Box Dimensions (LxWxH) | 10.9 x 8.3 x 2.95" |
ProAm USA Canon BP Battery Plate for 12V Monitor/LED Light Specs
| Compatibility | Canon BP-911, BP-915, BP-930, and BP-945 |
| Power Connector Size | Outer Diameter: 0.2" (5.5 mm)
Inner Diameter: 0.1" (2.1 mm) |
| Weight | 3 oz (85 g) |
Packaging Info
| Package Weight | 0.15 lb |
| Box Dimensions (LxWxH) | 4 x 2.9 x 0.9" |
ProAm USA Canon BP-915 Equivalent 2000mAh Battery & Charger Specs
| Compatibility | Canon BP series battery adapter plate
Canon XL series camcorders |
| Amp Hours | 2000 mAh |
| Battery Type | Canon BP-915 type lithium-ion |
| Battery Life | Up to 5 hours |
Packaging Info
| Package Weight | 0.45 lb |
| Box Dimensions (LxWxH) | 4.3 x 3.1 x 2" |
ProAm USA LCD Monitor Mounting Bracket and Ball Mount Specs
| Dimensions | 7.13 x 1.00 x 2.75" (18.1 x 2.5 x 7.0 cm) |
| Weight | 5.8 oz (164.4 g) |
Packaging Info
| Package Weight | 0.55 lb |
| Box Dimensions (LxWxH) | 8.6 x 3.4 x 2.3" |
ProAm USA 7" LCD Video Monitor Hood / Sunshade Specs
| Materials | Nylon / foam |
| Mounting | Hook-and-loop fasteners |
| Height | Not specified by manufacturer |
| Width | Not specified by manufacturer |
| Depth | 5" / 127 mm |
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 16.3 x 5.2 x 0.6" |
ProAm USA 8" Hook-and-Loop Fastener Cable Ties (4-Pack) Specs
| Length | 8" (20 cm), each |
| Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 0.01 lb |
| Box Dimensions (LxWxH) | 5.5 x 3 x 0.35" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
