MCP4011T-103E/SN is a 10Kohm, volatile, 6bit, single digital potentiometer with U/(active low)D interface. It can be configured as either a potentiometer or rheostat. The wiper setting is controlled through a simple up/(active-low) down (U/(active-low) D) serial interface.
- RAM memory type, mid-scale POR wiper setting
- 75ohm typical wiper, 64 number of steps, VDD operating range from 1.8V to 5.5V
- U/(active low) D control interface
- 64 taps 63 resistors with taps to terminal A and terminal B
- Simple up/(active low) down protocol
- Power-on recall of default wiper setting
- 45µA supply current typical (5.5V, CS (active low) = VSS, fU/D = 1MHz)
- RAB / 63ohm step resistance typical (VDD = 2.7 to 5.5V, VSS = 0V, TA = +25°C)
- 1MHz bandwidth -3dB typical (Code = 1F, output load = 30pF)
- 8 lead SOIC package, extended temperature range from -40°C to +125°C
Product details
| End To End Resistance:
10kohm
|
| No. of Pots:
Single
|
| Control Interface:
Up/Down
|
| Track Taper:
-
|
| Resistance Tolerance:
± 20%
|
| Supply Voltage Min:
1.8V
|
| Supply Voltage Max:
5.5V
|
| Potentiometer IC Case Style:
SOIC
|
| No. of Pins:
8Pins
|
| No. of Steps:
64
|
| Temperature Coefficient:
150ppm/°C
|
| Operating Temperature Min:
-40°C
|
| Operating Temperature Max:
125°C
|
| Product Range:
-
|
| Automotive Qualification Standard:
-
|
Other details
| Brand |
MICROCHIP |
| Part Number |
MCP4011T-103E/SN |
| Quantity |
Each (Supplied on Cut Tape) |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
