Texas Instruments DS90CF384MTDX/NOPB Display Driver Programmable Lvds Receiver 24Bit 3V to 3.6V Supply Link 65MHz TSSOP-56

The DS90CF384MTDX/NOPB is a FPD-link Receiver converts the LVDS data streams back into 28 bits of CMOS/TTL data. At a transmit clock frequency of 65MHz, 24 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455Mbps per LVDS data channel. Using a 65MHz clock, the data throughputs is 227Mbps. The transmitter is offered with programmable edge data strobes for convenient interface with a variety of graphics controllers. The transmitter can be programmed for rising edge strobe or falling edge strobe through a dedicated pin. A rising edge transmitter will inter-operate with a falling edge receiver (DS90CF384) without any translation logic.

• Power-down mode (<0.5mW total)
• Single pixel per clock XGA (1024x768) ready
• Supports VGA, SVGA, XGA and higher addressability
• Up to 1.8Gbps throughput
• Narrow bus reduces cable size
• PLL requires no external components
• Falling edge data strobe receiver
• Compatible with TIA/EIA-644 LVDS standard
• 290mV Swing LVDS devices for low EMI
• 20 to 65MHz Shift clock support
• <250mW (typical) Chipset (Tx + Rx) power consumption
• >7kV ESD rating

Applications

Industrial

Other details

Brand	TEXAS INSTRUMENTS
Part Number	DS90CF384MTDX/NOPB
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.