The 480GB Racer Series 2.5� SATA 3.0 SSD from VisionTek features the SandForce processor with Tier 1 synchronous NAND and offers speeds of up to 560MB/s. The SSD features DuraWrite that reduces over-writing and extends the drive endurance. With Wear Leveling and Monitoring, the drive distributes data evenly across the entire drive. Your data is safeguarded against data corruption, thanks to the advanced Read/Disturb Management that spreads read/write cycles across the flash components. It also features intelligent garbage collection that maintains optimal write speeds by clearing deleted data blocks during off-peak usage times and returns reusable drive space. This Racer series SSD is suitable for high speed audio, film, photography, and graphic production applications.
- DuraWrite reduces over-writing and extends the drive endurance
- Advanced Wear Leveling & Monitoring distributes data evenly across the entire drive
- Advanced Read/Disturb Management safeguards against data corruption by spreading read/write cycles across the flash components
- Intelligent garbage collection maintains optimal write speeds by clearing deleted data blocks during off-peak usage times and returns reusable drive space
- RAISE (Redundant Array of Independent Silicon Elements) protects the data on your drive from flash block failures by monitoring and correcting errors in real time
- Superior error correction (ECC) protection for longest data retention and drive life
- Low heat generation
- No moving parts for reliable and nearly silent operation
- TAA compliant and made in USA
In the Box
VisionTek Racer Series 2.5" SATA 3.0 SSD (480GB)
| Data Rates | Sustained Peak: Up to 560 MB/s (read) / 525 MB/s (write) |
| 4KB Random Write | Up to 80K IOPS |
| Controller | LSI SandForce 2281 Series with 7% over provisioning |
| Capacity | 480 GB (512 GB total flash memory with 32 GB dedicated to real-time redundancy and error correction) |
| NAND Flash Memory | Tier 1 synchronous MLC |
| Form Factor | 2.5" (9.5 mm) |
| Interface | SATA 3.0 compliant to support SATA 6 Gb/s, 3 Gb/s and 1.5 Gb/s applications |
| Format | Unformatted |
| Features | Native Command Queuing (NCQ), TRIM support, DuraClass technology, DuraWrite technology, RAISE technology, Advanced Read Disturb Management, thermal threshold management, Intelligent Block Management and Wear Leveling, Intelligent Data Retention optimization, 55-bit BCH ECC Native Command Queuing (NCQ): Up to 32 commands |
| ECC Recovery | Up to 55 bits correctable per 512-byte sector (BCH) |
| Security | Chip Based Data Encryption: 128-bit AES-compliant |
| Nonrecoverable Read Errors | Less than 1 sector per 1016 bits read |
| Trim Support | OS Dependent |
| Interfaces | 1 x Serial ATA-600 - 7 pin Serial ATA |
| Bay Type | 1 x 2.5", 1 x 3.5" (with included adapter) |
| Certifications | CE/FCC/RoHS |
| Dimensions (L x W x H) | 3.9 x 2.7 x 0.4" (9.9 x 6.8 x 1.0 cm) |
| Weight | 0.26 oz (117.93 g) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
