WesAudio _Pandora 500 Series Multiband Analog Compressor with Digital Recall and Automation

Enjoy the rich, warm sound of multiband analog compression and the ease of digital recall and automation in your 500 Series rack with the _ Pandora from WesAudio. This feature-rich powerhouse puts a VCA compressor in each of its three frequency bands, with a pair of crossovers that allow you to fine-tune the frequency ranges to provide precise level control across your low, mid, and high signal information. In addition, the unit allows you to automate and recall the hardware settings from your DAW using a digital plug-in interface, easily integrating into today's workflows by giving you the best of both worlds.

Purely Analog Design

Multiband compressor with 24 dBu of headroom, delivering superior audio quality. Independent VCA compressors on each band provide maximum control

3-Band Control with Harmonic Distortion

Crossover filters range from 40 Hz to 2 kHz, and 2 kHz to 15 kHz for precise multiband processing. Each band features tailored harmonic distortion, optimized for its frequency range

Comprehensive Metering

Gain reduction visible on the front panel and plug-in, with input meters for each band in the plug-in

Side-Chain Filters

3 selectable side-chain low-pass filters to isolate problematic high frequencies, while 3 selectable side-chain high-pass filters provide for enhanced low-frequency management

Parallel Compression

MIX knob allows easy blending of dry and compressed signals

True-Bypass and Soloing

Ensures total transparency when bypassed, each band can be fully bypassed or soloed for isolated processing

Modern GUI

Allows complete control of hardware parameters from the plug-in interface. 10 touch-sensitive encoders allow automation recording of specific parameters in your DAW. Digital recall can be achieved by connecting the unit via the front panel mini USB socket or through the _TITAN chassis.

500 Series Compatible

Regardless its extensions, Pandora is fully compatible with the 500 Series standard. Digital features can be enabled through the mini-USB socket on the front panel.

Each WesAudio device in the ng500 (Next Generation 500 Series) product line is equipped with a special connector. This connector is an extension to the 500 Series, and allows your device to be managed/recalled through specialized GCon protocol (e.g. _TITAN 500 Series 10-slot frame). This extension is compatible with the 500 Series standardized plug type; however, some manufacturers apply enormous screws to the plug itself, which prevent the device from fitting in. Based on official research, more than 90% of available 500 Series racks will fit just fine. Currently known exceptions include:

• Rupert Neve Designs 500 Series Racks (R6 and R10)
• Aphex 500 Series rack
• Some older BAE racks (not produced anymore)
• Midas L6 (module won�t fit to the very end on slots 3 and 6)
• Midas L10 (module won�t fit to the very end on slots 4 and 8)

 

WesAudio _Pandora Specs

USB I/O	1 x Micro-USB Female Input/Output
Frequency Response	20 Hz to 20 kHz (0.2 dB)
THD+N	Wet: 0.009% (1 kHz, 0 dBu) Dry: 0.005% (1 kHz, 0 dBu)
Input Impedance	10 kilohms
Output Impedance	< 100 ohm
Crosstalk	< -110 dB (1 kHz)
Attack Time	0.1, 0.3, 1, 3, 10, 30 ms
Release Time	0.1, 0.3, 0.6, 0.9, 1.2, Auto ms
Ratio	1.5, 2.4, 10
Sidechain	SC HPF Filter Low: 60, 90, 150 Hz SC LPF Filter High: 3, 6, 9 kHz
Format	3 Slots 500 Series Stereo Module

Power Source	DC Input
Operating Current	160 mA 140 mA

Mounting	Multiple 500 Series Rack
Color	White
Material of Construction	Metal
Dimensions	6.2 x 5.2 x 4.5" / 158 x 133 x 115 mm
Weight	2.2 lb / 1 kg