- Ribbon Mic for Commentary and Speech
- Directional Polar Pattern
- Low-Cut Roll-Off at 16 Hz
- For Close Positioning to Mouth
- Reduced Noise in Ambient Environments
- Stainless Steel Protective Breath Shield
- Removable Plastic Hygiene Shield
The Coles 4104B Lip Microphone is a ribbon microphone designed for commentary and speech capturing in noisy environments. A sensitive ribbon transducer is combined with a directional polar pattern and flat, low-cut frequency response at 16 Hz. The result is accurate signal reproduction without noise caused by ambiance or proximity effect.
In order to minimize noise and achieve the best frequency response, the Lip Microphone requires the user to position the microphone close to the mouth. A positioning bar makes contact with the user's lip and creates the correct talking distance between the user and microphone. Stainless steel breath shields protect the capsule against moisture and noise due to sibilance and plosive sounds. A removable, plastic hygiene shield is available and can be cleaned for reuse or thrown away.
- Noise-Free in Ambient Environments
- The Coles 4104B Lip Microphone is designed for commentary applications in noisy, ambient environments. Directional polar and linear frequency response with low-cut roll-off result in accurate reproduction with minimal noise.
- Positioning Bar
- A ribbon transducer is featured in the capsule and requires close positioning to the mouth for best results. A positioning bar makes contact with the user's lip and maintains the necessary talking distance.
- Low Frequency Roll-Off
- The Lip Microphone features a flat frequency response with a low-cut roll-off at 16 Hz. This eliminates low frequency ambient noise and noise due to proximity effect.
| Transducer | Ribbon microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 60 Hz to 12 kHz |
| Dynamic Range (Typical) | Not specified by manufacturer |
| Signal-to-Noise Ratio | Distortion less than 1% at an SPL of 120 dB |
| Maximum Input Sound Level | Not specified by manufacturer |
| Power Requirements | Ribbon transducer�no external power required |
| Output Impedance | 300 Ohms |
| Output Connectors | 3-pin XLR male |
| Pad | No |
| Low Frequency Roll-Off | Low frequency roll-off at 16 Hz |
| Dimensions (L x W x D) | 7.9 x 2.2 x 3.0" (20.1 x 5.6 x 7.6 mm) |
| Weight | 10 oz (283 g) |
| Packaging Info |
| Package Weight | 1.45 lb |
| Box Dimensions (LxWxH) | 9.0 x 8.1 x 3.0" |
In the Box
Coles Microphones 4104B Lip Microphone - Noise Cancelling Commentator's Ribbon Microphone
- Storage Case
- Limited 1-Year Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
