₹ 16350.0 includes GST and import duties. | |
B2B customers can avail ₹ 2493.38 ITC on this product | |
100% Secure Payments | 100% Genuine product | |
The product is eligible for Free Shipping |
Description
- Wire-Tracing for Telephone Lines & More
- Probe and Signal Generator in One
- Pulse/Warble Tones, Bandpass Filtering
- 12" Signal Range
- Alligator Clips, RJ-11, or RJ-45
- Magnetic Back for Mounting
- TrueTrace Technology for Easier Cable ID
- Built-In Signal-Strength Indicator
- Overload protection up to 120 VAC
- Runs on 9V Batteries
The Fox & Hound from Triplett is a handheld, wire-tracing tone generator and probe kit useful for testing signal throughout any apposite cable (red/green telephone lines, LAN cables, Alarm cables, and more). It features two separate units, the Fox 2 tone generator and the Hound 3 probe, an inductive amplifier which follows the signal generated by the Fox throughout the cable you're testing.
The Fox 2 is battery operated and capable of generating both pulse and warble tones. It has a magnetized back for mounting in multiple situations, as well as an on/off locking button to prevent you from accidentally turning off the unit mid-use. For connection purposes, the unit utilizes alligator clips, an RJ-11 connection point, or an RJ-45 termination (via the included RJ-11 to RJ-45 adapter). Furthermore, the device features proprietary TrueTrace technology for quicker identification of cabling, 120 VAC overload protection in case you touch a hot line, and a continuity tester.
The Hound 3, on the other hand, sports a range of 12", allowing you to trace tones through cables from a foot away. It features adjustable sensitivity and loudness controls, though you can also monitor tones privately via a standard 3.5mm headphone jack. Built-in LED lights at the head of the probe improve visibility in dark areas, and boast the added effect of reducing the noise of fluorescent lights. Additionally, a bandpass filter suppresses unwanted frequencies.
- Hound 3 Features
-
- Adjustable sensitivity and loudness control
- Bandpass filter suppresses 60 Hz and high-frequency noise
- Identifies Fox 2�s tracer tone up to 12 inches away
- Headlights illuminate dark areas and reduce fluorescent-light noise
- Built-in signal-strength indicator
- Earphone jack for use in quiet or noisy environments
- Easy-access battery door
- Rugged, moisture resistant
- Mylar cone speaker
- Fox 2 Features
-
- 3 methods of connectivity: RJ-11, RJ-45, or Alligator Clips
- Cordless-phone interface
- High-output, selectable tracer tone (Warble and Pulse)
- Magnetic back for easy mounting
- TrueTrace cadence shift for definite ID of cable or par within cable
- Red/green telephone lines polarity LEDs
- Tone/battery LED � indicates that Tracer tone is on and battery status
- Overload protection to 120 VAC
Tone Generator | |
---|---|
Indicators | 3 x LED, red |
Load | Approximately 13 mA at 50 VDC |
Waveform | Square wave or differentiated square-wave level Approximately 8 Vp-p (+14 dBu, 600 Ohms) into an open circuit Approximately 5 Vp-p (+2 dBm into 600 Ohms), terminated phone line |
Frequencies | Low: Approximately 800 Hz High: Approximately 1000 Hz Warble: Alternates between low and high frequencies |
Battery | 9 V alkaline battery |
Battery Life | 500 hours continuous |
Dimensions | 3.7 x 2.4 x 1.1" / 9.4 x 6.1 x 2.8 cm |
Weight | < 7.0 oz / 198.4 g, including battery |
Probe | |
---|---|
Detection Range | 12.0" / 30.5 cm |
Speaker | 1.5" / 3.8 cm mylar driver with alnico magnet |
Supported Probes | Solid aluminum conical probe for low-resistance contact testing Conductive Plastic duckbill probe with metal threads for sensitive non-shorting testing |
Earphone Jack | 1 x 1/8" / 3.55 mm jack |
Battery | 9 V |
Indicators | Tone / Battery LED: Indicates that Tracer tone is on and battery status |
Dimensions | Diameter at speaker: 1.9" / 4.8 cm Diameter at body: 1.4" / 3.5 cm Length with metal probe: 8.3" / 21.0 cm Length with plastic probe: 9.3" / 23.5 cm |
Weight | < 8.0 lb / 3.6 kg, including battery |
Packaging Info | |
---|---|
Package Weight | 1.35 lb |
Box Dimensions (LxWxH) | 11.0 x 5.8 x 2.7" |
- Fox 2 Tone Generator
- Hound 3 Probe
- RJ-11 to RJ-45 Adapter
- Duckbill
- Metal Tip
- Earphones with 36" Leads
- Durable Cordura Case with Beltloop
- Storage Box
- Limited 3-Year Warranty
Bulk Discount
Quantity | Price |
2 | ₹ 16023.0 |
3-5 | ₹ 15859.5 |
5-10 | ₹ 15532.5 |
10+ | ₹ 15205.5 |
Bulk discount will be automatically applied during checkout based on quantity.