| ₹ 95390.0 includes GST and import duties. | |
| B2B customers can avail ₹ 14546.98 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
Tannoy CMS603ICTBM Overview
This pair of 6" Full-Range Ceiling Loudspeakers from Tannoy includes two wide-bandwidth, high-power handling, and high-sensitivity loudspeakers built around Tannoy's CMS 3.0 Ceiling Monitor System technology. This speaker has been re-engineered for optimum compatibility with Lab.gruppen commercial amplifiers while also delivering consistent broadband directivity, precise articulation for voice and music, and long-term reliability.
The point source configuration of the ICT driver's mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage, avoiding the significant energy losses in the vertical plane at the crossover frequency that are inherent in typical two-way designs. The ICT (Inductive Coupling Technology) drive unit also addresses two common component failures in background music systems: the tweeter and the crossover. Use of wireless electromagnetic coupling to drive the tweeter means that no crossover is required, making the ICT drive unit exceptionally reliable and ideal for applications where constant heavy usage is the norm. The mineral-loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.
The loudspeaker utilizes a 16-Ohm driver, making it ideal for use in high-performance, low-impedance systems. A low insertion-loss 60W transformer is included, with convenient front switching for taps at 60W, 30W, and 15W, with an additional 7.5W tap for traditional constant voltage systems. An extra clamp extension accommodates thicker ceiling panels, and a locking design prevents inadvertent over-screwing. The magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes.
Each speaker is supplied with an integral backcan, ready to install as a single unit and features an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. Strain relief is provided by a clamping mechanism for use with plenum-rated cable or conduit, while new spring-loaded and self-aligning clamps make for even quicker and easier installation. Each loudspeaker is shipped with a grille, two tile support rails, and a C-ring.
In the Box
- Tannoy 6" Full-Range Ceiling Loudspeaker with ICT Driver (Blind Mount, Pair)
- 2 x C-Rings
- 2 x Tile-Bridge Kits
- 2 x Paint Masks
- 2 x Cut-Out Templates
- 2 x Grilles
Tannoy CMS603ICTBM Specs
| Low Frequency Driver | 6.5" / 165 mm mineral-loaded polypropylene |
| High Frequency Driver | ICT aluminum dome |
| Frequency Response | 78 Hz to 22 kHz at -3 dB |
| Frequency Range | 51 Hz to 24 kHz at -10 dB |
| System Sensitivity | 91 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90° conical |
| Coverage Angle | 92°, 1 to 6 kHz |
| Directivity Factor | 7.1 averaged, 1 to 6 kHz |
| Directivity Index | 7.9 averaged, 1 to 6 kHz |
| Power Handling | Average: 60 W Program: 120 W Peak: 240 W |
| Recommended Amplifier Power | 120 W @ 16 Ohms |
| Nominal Impedance | 16 Ohms |
| Maximum SPL | Average: 109 dB Peak: 115 dB |
| Transformer Taps | 70 V: 60 W (83 Ohms) / 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / OFF & low impedance operation 100 V: 60 W (165 Ohms) / 30 W (330 Ohms) / 15 W (660 Ohms) / OFF & low impedance |
| Enclosure | Backcan: Zinc plated steel Baffle: Reflex-loaded UL 94V-0 rated ABS Grille: Steel, with weather-resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load-bearing safety bond |
| Clamping Characteristics | Security toggle clamp Clamping Range: 0.37 - 2.36" / 1 - 6 cm Recommended Clamp Torque: 1.5 Nm |
| Cable Entry | Cable clamp & squeeze connector for conduit up to 0.9" / 22 mm |
| Mount | Blind mount complete with fixed backcan |
| Connectors | Removable locking screw terminals with "loop thru" |
| Compliance | UL-1480, UL-2043, CE |
| Dimensions | Bezel Diameter: 10.8" / 27.4 cm Front of Ceiling to Rear of Back Can: 10.1" / 25.7 cm Front of Ceiling to Top of Safety Loop: 10.8" / 27.4 cm Hole Cutout Diameter: 10.0" / 25.3 cm |
| Weight | 11.9 lb / 5.4 kg |
Tannoy CMS603ICTBM Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 93482.2 |
| 3-5 | ₹ 92528.3 |
| 5-10 | ₹ 90620.5 |
| 10+ | ₹ 88712.7 |
Bulk discount will be automatically applied during checkout based on quantity.