| ₹ 238965.0 includes GST and import duties. | |
| B2B customers can avail ₹ 36442.16 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
RCF HL6 Overview
- 1Description
- 2At a Glance
- 3Precision Transducers
- 4Constant Directivity Waveguide
- 5Prefect for Installation
- 6Advanced Design
- 7HL 6's Low-Frequency Companion
Audio engineers and system installers in search of a compact line array system should check out the RCF HL 6, a lightweight, 2-way line array module that's ideal for live sound applications, including corporate environments, music venues, and houses of worship as well as touring companies and rental houses. The HL-6 requires a recommended 500W amplifier to power the dual 6" woofers and 1.75" compression driver, which combine for a 65 Hz to 20 kHz frequency range and an SPL of 131 dB.
Due to its symmetrical design, the HL 6 produces constant coverage without break up or attenuation, maintaining intelligibility, definition, and signal strength over distance. HL 6 features a structurally wooden reinforced polypropylene composite enclosure, and it is equipped with two rear handles for portability.
At a Glance
- 500W Program power handling
- 131 dB max SPL
- 65 Hz to 20 kHz frequency range
- 100 x 10° coverage angles
- Fully equipped with neodymium transducers
- Horn-loaded symmetric design
- Wooden reinforced polypropylene enclosure
- Steel grille with clothing
- Two speakON connectors
Precision Transducers
The RCF HL 6 features RCF transducers with neodymium magnets. RCF�s experienced engineering teams have specially developed and matched each component. An entire set of protections preserve product life and reliability.
High frequencies
- High-performance RCF ND840
- 1.75-inch diaphragm neodymium compression driver
- 900 Hz crossover point
Low frequencies
- Two 6� neodymium woofers
- Low frequencies handling down to 65 Hz
- Water resistant fiber doped cone
- Polycotton M-roll surround
- Hypervented magnetic structure
Constant Directivity Waveguide
The custom-designed waveguide allows a precise coverage of 100 x 10°, while also delivering a completely linear high-frequency response. The constant directivity waveguide delivers consistent coverage from 900 Hz to the highest audible frequencies.
Prefect for Installation
The passive architecture makes the HL 6 one of the lightest line array modules on the market. Combined with flexible rigging options and a wide range of accessories, it's the ideal line array for installation both in corporate environments, and music venues. HL 6 provides plenty of sound pressure and clarity that can replace antiquated, oversized sound systems with improved acoustic performance.
Advanced Design
- The integrated fittings are both easy to use and reconfigurable, allowing the system engineer to create J-shaped and spiral arrays starting at 1° angle.
- The hardware is designed for easy and fast setup. Up to 16 HL 6 modules can be fastened on a single flybar.
- The heavy-duty front grille is powder coated. A special transparent-to-sound foam backing inside helps to further protect the transducers from dust and debris.
HL 6's Low-Frequency Companion
Perfect for keeping the floor clear and maximizing the efficiency and coherence of the array, the low-frequency companion designed for the HL 6 is the high-performance flyable single 15" HL 35-S. The integrated fittings are both easy to use and reconfigurable, allowing the system engineer to extend the HL 6 lower range with one or multiple HL 35-S modules. It can be used attached to the flybar, on the floor, or stacked with the HL 6 on top. HL 35-S provides sound pressure and clarity that can replace antiquated, oversized sound systems with improved acoustic performance.
Table of Contents
- Description
- At a Glance
- Precision Transducers
- Constant Directivity Waveguide
- Prefect for Installation
- Advanced Design
- HL 6's Low-Frequency Companion
RCF HL6 Specs
| Configuration | Passive 2-Way |
| Enclosure Type | Bass-Reflex Line Array |
| Total Power Capacity | 250 W RMS 500 W Program 1000 W Peak |
| System Impedance | 1 x 16 Ohms |
Drivers
| HF Driver | 1 x 1" / 25.4 mm Horn-Loaded Compression Driver |
| HF Voice Coil | 1.75" / 44.45 mm |
| MF Driver | None |
| LF Driver | 2 x 6" / 152.4 mm Woofer |
| LF Voice Coil | 2" / 50.8 mm |
| Magnet | HF: Neodymium LF: Neodymium |
Performance
| Frequency Range | 65 Hz to 20 kHz -10 dB |
| Maximum SPL | 131 dB |
| Coverage Angle | 100° H x 10° V |
| Directivity | 16 (Directivity/Q Factor) |
Connectivity
| Audio I/O | 1 x speakON Input 1 x speakON Output |
Signal Processing
| Crossover | 900 Hz |
Physical
| Mounting | Integrated Rigging |
| Handles | 2 x Rear |
| Construction Material | Polypropylene, Steel, Wood |
| Dimensions | 18.5 x 14.8 x 9.3" / 469.9 x 375.9 x 236.2 mm |
| Weight | 26 lb / 11.8 kg |
RCF HL6 Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 234185.7 |
| 3-5 | ₹ 231796.05 |
| 5-10 | ₹ 227016.75 |
| 10+ | ₹ 222237.45 |
Bulk discount will be automatically applied during checkout based on quantity.