Schoeps CMC641 RAD-1 Set Colette Series Supercardioid Microphone with Radius RAD-1 Shockmount

The Schoeps CMC6-U is a balanced output stage and +12 to +48V phantom power supply for the Schoeps Colette series modular capsules. The transformer-less output stage ensures low-noise and pristine audio reproduction throughout. The CMC6-U is terminated with a standard balanced 3-pin XLR connection for use with standard microphone inputs and preamplifiers.

The matte gray Schoeps MK 41 is a supercardioid condenser microphone capsule designed to deliver minimal coloration and accurate capture of speech and music for sound recordists and audio engineers in film, television, and video production and studio recording sessions. The supercardioid polar pattern offers enhanced attenuation of off-axis SPL and consistent directionality throughout its 40 Hz to 20 kHz frequency range, which naturally rolls off sub-bass frequencies.

The MK 41 is compatible with Schoeps Colette microphone amplifiers and requires no tools to install.

The RAD-1 Shockmount with Low-Profile 3-Pin XLR Cable by Radius is designed for use with microphones with a diameter of 0.74 to 0.98" and length of 9.8". Two pairs of shock-absorbing hoops are included: one standard and one light (softer) firmness. Use the included low-profile 3-pin XLR cable to connect your mic to your recording device.

This gray-flocked Hollow Foam Teardrop Popscreen from Schoeps is compatible with all Schoeps Axially addressed microphones. It is used as a shield against mild wind or moving noise on the boom and helps prevent pops when used in close-up speech. It is made of foam, and mounted on a plastic carrier that sits on your mic, allowing the foam to enclose an air volume around the microphone capsule like a windscreen basket, so that the foam does not touch the microphone, which reliably prevents any motion noise. The microphone should be pushed as far as possible into the foam for best results.

The Schoeps SG20 Microphone Stand Adapter is designed to stand mount microphones measuring 20mm or 21mm in diameter. The SG20 features a strong metal housing and a durable plastic clamp. Its base is threaded for 5/8"-27 stands, and a threaded adapter is included to accommodate 3/8" and 1/2" mounting. The angle is continuously variable.