| ₹ 17150.0 includes GST and import duties. | |
| B2B customers can avail ₹ 2615.38 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
sE Electronics DM2-MIC-PRE-U Overview
The DM2 TNT Active In-Line Microphone Preamplifier from sE Electronics is intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately) to provide gain for the microphone signal. A switch allows you to select between 15 and 30 dB of gain to boost the audio signal, improving the level to your preamp, mixer, or audio interface without adding noise or coloring the sound.
The DM2 offers eight load-impedance settings, allowing you to properly match your microphone and preamp combination and find the sweet spot for optimal results. The sophisticated Class-A design and high-grade FETs provide clean gain with low self-noise. The active preamp requires 48V phantom power for operation and is built with a dedicated output buffer amplifier that reduces RF interference, buzz, and hum while allowing it to drive long cable runs. Additionally, the DM2 offers a roadworthy, slim, all-metal design, ensuring reliable operation for onstage applications in difficult environments.
sE Electronics DM2-MIC-PRE-U Specs
| System Requirements | Input: Passive Microphone (Ribbon/Dynamic) Output: Preamp/Mixer or Audio Interface Providing 48 V Phantom Power Limitations: Not Suitable for Phantom-Powered Microphones (Condenser Microphones, Active Ribbon Microphones) |
| Frequency Range | 10 Hz to 120 kHz (-0.3 dB) |
| Gain | 15 / 30 dB (Switchable) |
| Maximum Output Level | 9.5 dBV / 3.0 V (0.5% THD) |
| Output Noise | Level: 1 ?V at 15 dB / 6.6 ?V at 30 dB |
| Powering | 48 V According to IEC 61938 |
| Impedance | 135 Ohms |
| Load Impedance | Recommended: >1 Kilohm |
| Current Consumption | 3.1 mA |
| Connectors | 3-Pin Male XLR 3-Pin Female XLR |
| Dimensions | 0.75 x 3.76" / 19 x 95 mm |
| Weight | 2.8 oz / 80 g |
| Package Weight | 0.22 lb |
| Box Dimensions (LxWxH) | 6.4 x 1.25 x 1.2" |
sE Electronics DM2-MIC-PRE-U Reviews
Great Little Preamp
Most audio interfaces don't give mics enough gain, usually only 60 dB. This is not enough; you need more like 80 dB to get usable mic levels at reasonable working distances. The SE DM2 fits the bill very nicely. It's transparent and very clean. I use it with a dynamic mic (AKG D202e).
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 16807.0 |
| 3-5 | ₹ 16635.5 |
| 5-10 | ₹ 16292.5 |
| 10+ | ₹ 15949.5 |
Bulk discount will be automatically applied during checkout based on quantity.