Bolt VX-760C Wireless TTL Flash for Canon Kit with Compact Battery Pack, Rapid Charger and AA Batteries

The Bolt VX-760C Wireless TTL Flash for Canon Kit with Compact Battery Pack, Rapid Charger and AA Batteries from B&H combines the professional VX-760C wireless TTL flash unit with a compact battery pack and a rapid charger with NiMH batteries for extended flash shooting and fast recycle rates.  

The VX-760C Wireless TTL Flash for Canon is a dedicated flash for use with Canon cameras that support shoe mount flash. The VX-760C features a guide number of 164' at ISO 100 and an adjustable tilt head with six positions: -7 to 90°. The -7° downward tilt allows you to fully illuminate your subject when shooting close-up. You can also twist it to the left up to 90° and to the right up to 180°. It covers a 24-180mm range (in 35mm full frame format) and extends to 18-180mm with the diffuser panel in place. In auto mode the zoom range is stepless: it does not set at 24mm, 35mm, etc, but matches the exact focal length of the zoom lens for optimal lighting. The flash supports rear curtain synchronization for shooting at slower shutter speeds. The VX-760C is equipped with wireless (optical pulse) manual and full TTL master and slave functions. It can operate on 4 distinct channels and in up to 3 wireless groups.

The VX-760C has an autofocus assist for low-light photography and an automatic power-saving function that turns the flash off when it's inactive. It is powered by four AA batteries with a flash duration between 1/800 and 1/20,000 of a second and a convenient HV port also allows you to connect the flash to an external power source for extended usage and faster recycling.  

The Bolt CBP-C1 Compact Battery Pack is a lightweight, reliable power source that provides up to 595 full power flashes and recycles in 1.24 seconds. It is powered by 4 or 8 AA alkaline, lithium or NiMH batteries. Also included with this kit are two 4-hour rapid chargers with 8 AA NiMH batteries that can be recharged up to 1000 times for long-term use with the CBP-C1 Compact Battery Pack and Bolt VX-760C flash.

• Bolt VX-760C Wireless TTL Flash for Canon Cameras

  The VX-760C Wireless TTL Flash for Canon from Bolt is a dedicated flash for use with Canon cameras that support shoe mount flash. The VX-760C features a guide number of 164' at ISO 100 and an adjustable tilt head with six positions: -7 to 90°. The -7° downward tilt allows you to fully illuminate your subject when shooting close-up. You can also twist it to the left up to 90° and to the right up to 180°. It covers a 24-180mm range (in 35mm full frame format) and extends to 18-180mm with the diffuser panel in place. In auto mode the zoom range is stepless, it does not set at 24mm, 35mm, etc, but matches the exact focal length of the zoom lens for optimal lighting. The flash supports rear curtain synchronization for shooting at slower shutter speeds. The VX-760C is equipped with wireless (optical pulse) manual and full TTL master and slave functions. It can operate on 4 distinct channels and in up to 3 wireless groups.

  The VX-760C has an autofocus assist for low-light photography and an automatic power-saving function that turns the flash off when it's inactive. It is powered by four AA batteries (not included), with a flash duration between 1/800 and 1/20,000 of a second. A convenient HV port allows you to connect the flash to an external power source, such as the Bolt Cyclone, for extended usage and faster recycling. The included stand allows you to set the flash up on a flat surface or to attach it to a tripod head, light stand, or clamp that has a standard 1/4"-20 mount.

  This on-camera flash is fully compatible with Canon E-TTL / E-TTL II.

  The VX-760C features full manual and full TTL wireless remote master and slave functions via wireless optical pulse transmission. Up to four channels (1, 2, 3 and 4) can be utilized so that master transmits only to designated slaves on the same channel. As slaves and masters, the VX-760C can be assigned to any one of three groups (A, B or C) and the mode and power set separately for each group.

  Multi (stroboscopic) mode allows the flash to fire multiple times during one single exposure. This is useful to capture fast moving subjects or can provide multiple images of the subject moving through the frame. The VX-760C is also capable of being a wireless stroboscopic master, sending a stroboscopic signal to slave units.

  The guide number for this flash is 164' (50 m) at 50mm and ISO 100.

  The adjustable six-position flash head can be tilted up -7-90°, left 0-90° and right 0-180°. It has an automatic and manual 24-180mm zoom head.

  As Canon cameras do not offer Flash Exposure Bracketing, the VX-760C is equipped with this feature to allow you to shoot three sequential images at varied flash power. FEB automatically adjusts flash compensation between -3 and +3, once above and once below the set flash exposure. This provides variations when determining the exact flash power is difficult. Red-eye Reduction and FE Lock are also supported by the VX-760C if your Canon camera has those functions.

  The 2.0" rear backlit LCD Display allows you to easily make adjustments in low light and clearly see what your flash is set to for accurate readings.

  With eight different manual power levels you can easily change from full to 1/128 power and fine tune your levels in increments of 1/3.

  With a built-in autofocus-assist beam you can shoot in low-light conditions, using the beam to aid your camera's AF modes.

  A PC sync terminal and included 12" cable allows you to easily shoot with the VX-760C off of the camera for increased versatility.

  An HV port on the side of the flash allows you to connect the VX-760C to an external power source for extended use and for faster recycling time. The connection for the HV port is a Canon CZ-type.

  This flash supports rear-curtain sync

  A built-in reflector allows you to enhance the light coming from your flash and the diffuser panel, which extends the flash range to wide-angle 18mm, also softens the light for more flattering shadows and images.

  Lock mode prevents inadvertent operation of the flash unit and overheating protection mode offers warnings when the flash is operating continuously with a chance of overheating and will temporarily disable the flash if temperatures are too high.

  The automatic power-saving function turns the flash off to conserve power, allowing you to shoot longer

  UPC: 847628555976
• Bolt CBP-C1 Compact Battery Pack for Select Canon & Bolt VX Series Flashes

  The CBP-C1 Compact Battery Pack from Bolt will boost the number of flashes and the recycle time of your compatible Canon or Bolt VX-series flash. The CBP-C1 can operate on 4 or 8 AA batteries--alkaline, lithium, or nickel-hydride (Ni-MH). Lights on the pack indicate Standby, Recycle, or Low Power mode. A thermal protection switch prevents overheating. The CBP-C1 can provide up to 595 flashes per charge, and recycle times as fast as 1.24 seconds. The pack, which weighs just 7 oz without the batteries, can also be attached to the bottom of your camera using the tripod socket.

  Option to use 4 or 8 AA batteries at a time

  Built-in thermal protection switch to automatically prevent overheating.

  Recycles as fast as 1.24 seconds (with 4x AA alkaline batteries in flash unit and 8x Ni-MH batteries in Compact Battery Pack).

  Up to 595 flashes per charge at full power (with 4x AA alkaline batteries in flash unit and 8x Ni-MH batteries in Compact Battery Pack).

  Compatible Flashes

  Canon: Speedlite 600EX-RT, 600EX II-RT, 580EX, 580EX II, 550EX, 540EZ, 430EZ, Macro Ring Lite MR-14EX, Macro Twin Lite MT-24EX
  Bolt: VX-710N, VX-710C, VX-760N, VX-760C
  Nissin: Di700 for Canon, Di866 for Canon, Di866 Mark II for Canon, MG8000 for Canon

  UPC: 847628030589
• 2 x Watson 4-Hour Rapid Charger with 4 AA NiMH Rechargeable Batteries (2300mAh)

  This Watson 4-Hour Rapid Charger comes with four 1.2V, 2300mAh AA NiMH batteries that are rechargeable up to 1000 times. The charger will recharge 4 of these included batteries in about 280 min, or 2 in about 140 min. You can also use it to charge optional AA NiCd batteries, or AAA NiMH or NiCd's. The charger's integrated micro-controller ensures that each battery is charged to its full capacity, and automatic charge cut-off prevents overcharging. Should the controller and automatic cut-off function both fail, the safety guard timer will kick in to ensure that the charger still shuts off after 6 hr. The charger also has circuit and polarity protection. Two LED indicators display charging status, and there are two individually-monitored charging channels. The charger has switching 100-240VAC power, enabling use all over the world. Its compact outlet prongs can fold in, making the unit more compact for storage.

  UPC: 847628536814