NTG2 Indoor Vlogger Kit with Interface and Broadcast Arm Overview
- 1 Description
- 2 Rode NTG2 Shotgun Microphone
- 3 Senal XU-1648 XLR-to-USB Interface
- 4 Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
Basic Tips for Recording Audio for Video | Audio for Video, Part 1
Bundled together by B&H for your convenience, the Rode NTG2 Indoor Vlogger Kit provides tools useful for vlogging or podcasting indoors. In total, you get a Rode NTG2 Shotgun microphone, a Senal audio interface, and a two-section broadcast arm.
The microphone delivers pro-quality sound of the sort often used in broadcast radio or podcasting pieces. If you're podcasting, speak into the microphone at around a fist's distance from the capsule. For vlogging, set the mic just out of the frame of the shot, and you'll get a relatively clear, clean, and present tone, especially if you've applied a modicum of room treatment to your environment.
Set the microphone up in the broadcast arm, which clamps easily onto your desk. An XLR cable is threaded through the broadcast arm; use this XLR cable to plug your microphone into the Senal interface. Route the interface to your computer with the provided USB cable, and you're good to go.
Rode NTG2 Shotgun Microphone
Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.
The NTG2's elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG2 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter. The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.
Quality Sound Capture
The combination of the NTG2's 11" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
Battery or Phantom Powered
Thanks to its 3-pin XLR output and operability with 48V phantom power or a single AA battery, the NTG2 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on cameras and camcorders.
Ideal for Boompole Mounting
The NTG2 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG2 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.
Windscreen Minimizes Wind Noise
The NTG2 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).
![]()
UPC: 698813000470
Senal XU-1648 XLR-to-USB Interface
The XU-1648 from Senal is a compact XLR-to-USB adapter interface that allows you to plug your microphone into the USB port of any Mac or Windows computer for use with your favorite digital recording software. Its rugged build and plug-and-play operation make it perfect for bands, recording artists, podcasters and more.
For use with dynamic or condenser microphones, the XU-1648 delivers 16-bit/48-kHz studio-quality sound. It also features a microphone preamp with gain control and switchable 48V phantom power. Its 1/8" headphone output features a volume control and allows for zero-latency monitoring. There is also a monitor level control to adjust the balance between the audio playback from your computer and the sound of your microphone.
In addition, the XU-1648 features a tough, all-metal chassis with non-slip neoprene feet on the bottom to prevent it from slipping.
Plug-and-play XLR-to-USB adapter
16-bit/48-kHz studio-quality sound
Low-noise mic preamp with gain control
1/8"(3.5mm) latency-free headphone output with level control
Monitor output adjusts balance between audio playback and live mic
Peak level indicator to help avoid clipping
![]()
UPC: 847628569874
Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.
The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2X allows for precise microphone placement.
The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.
Versatile
Ideal for studios as well as home use
Internal Springs
Internal springs provide smooth, noise-free positioning and clean and sleek profile
Sturdy
Supports microphones up to 5 lb / 2.27kg
Compatibility
The 5/8"-27 standard microphone thread is compatible with most shockmounts and microphone clips
Precision
Extends up to 40" / 101.6cm and rotates 360° allowing for precise microphone placement
XLR Cable
The integrated 15-foot XLR cable provides a secure, locking connection and excellent signal transfer
Extra Height
A 14" / 13.6cm riser is included. It provides extra height to the broadcast arm for extending over computer or studio monitors
Combo Mount
The heavy-duty combo mount is comprised of a C-clamp for clamping to a desktop up to 2.3" / 5.8cm thick, and a detachable desktop mount for permanent attachment to a desktop with the included screws
14" Riser
The included riser adds 14" / 13.6cm of height to the broadcast arm so that it can easily extend over computer or studio monitors
![]()
UPC: 847628578272
In the Box
- Rode NTG2 Shotgun Microphone
- Rode RM5 Stand Mount for the NT5 Microphone
- Rode WSVM Shotgun Wind Screen
- Padded Zip Pouch
- Limited 1-Year Warranty, Extendable to 10 Years upon Registration
- Senal XU-1648 XLR-to-USB Interface
- 6.25' (1.9m) USB Cable
- Limited 1-Year Warranty
- Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
- Auray BAC-1 Universal Interchangeable Combo Mount for Broadcast Arms
- 4 x Mounting Screws
- Auray BAR-1 14" Riser for Broadcast Arms
- Limited 1-Year Warranty
Table of Contents
- Description
- Rode NTG2 Shotgun Microphone
- Senal XU-1648 XLR-to-USB Interface
- Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable
Rode NTG2 Shotgun Microphone Specs
Microphone
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Condenser |
| Diaphragm | 0.5" / 12.70 mm |
| Polar Pattern | Supercardioid |
| Circuitry | Solid-State |
| Pad | None |
| Low-Cut Filter | 12 dB/Octave @ 80 Hz |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 131 dB SPL |
| Impedance | 250 Ohms |
| Sensitivity | -36 dBV/Pa at 1 kHz |
| Dynamic Range | 113 dB |
| Signal-to-Noise Ratio | 76 dB A-Weighted |
| Equivalent Noise Level | 18 dB A-Weighted |
Connectivity
| Output Connectors | 1 x 3-Pin XLR |
Power
| Operating Voltage | 48 V |
| Operating Current Consumption | 2 mA |
Physical
| Length | 11.02" / 280 mm |
| Diameter | 0.87" / 22 mm |
| Weight | 5.68 oz / 161 g |
Packaging Info
| Package Weight | 1.145 lb |
| Box Dimensions (LxWxH) | 13.15 x 6.05 x 2.15" |
Senal XU-1648 XLR-to-USB Interface Specs
Interface
| Max Sample Rate/Resolution | 48 kHz / 16-Bit |
Connectivity
| Host Connection | USB Type-B (USB 2.0) |
| Analog I/O | 1 x XLR 3-Pin Input
1 x 1/8" (3.5 mm) TRS Headphone Output |
| Phantom Power | +48 V ± 2 V |
| Digital I/O | None |
| MIDI I/O | None |
Performance
| Frequency Response | 25 Hz to 20 kHz |
| Gain Range | Inputs:
35 dB |
| Headphone Output Power | 50 mW into 16 Ohms |
| Impedance | Inputs:
1.2 kOhms |
Digital Audio
| Sample Rates | 32, 44.1, and 48 kHz (D/A Conversion)
8, 11.025, 16, 22.05, 32, 44.1, and 48 kHz (A/D Conversion) |
| Bit Depth | 16-Bit |
Power
| Power Consumption | 2.2 W |
| Phantom Power Current | 15 mA per Channel |
Physical
| Dimensions | 5.1 x 1.2 x 1.1" / 13 x 3.1 x 2.8 cm |
| Weight | 3.3 oz / 94.0 g |
Packaging Info
| Package Weight | 0.585 lb |
| Box Dimensions (LxWxH) | 6.95 x 6.65 x 1.65" |
Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable Specs
Physical
| Length | 40" / 101.6 cm |
| Weight Capacity | 5 lb / 2.27 kg |
| Microphone Mount | 5/8"-27 standard microphone thread |
| Clamping Range | 2.3" / 5.8 cm |
| Riser | 14" / 35.56 cm |
| Cable | XLR M to XLR F: 15' / 457.2 cm |
| Weight | 4.47 lb / 2.02 kg |
Packaging Info
| Package Weight | 6.45 lb |
| Box Dimensions (LxWxH) | 23.5 x 7.4 x 3.5" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
