APC SRT3000RMXLA Smart-UPS SRT 3000VA Rackmount UPS (120V)

8 x NEMA 5-20R Battery Backup Outlets

1 x NEMA L5-30R Battery Backup Outlet

1 x SmartSlot

3000 VA / 2700W Output

Keep critical equipment powered with the SRT3000RMXLA Smart-UPS SRT 3000VA Rackmount UPS from APC . Featuring one L5-30R and eight NEMA 5-20R outputs, this uninterruptible power supply is designed to keep important gear powered during power surges, spikes, or other disturbances. In addition to a 3000 VA or 2700W output, this UPS also features a surge rating of 340 joules, preventing currents over 30A from damaging connected equipment.

The APC SRT3000RMXLA utilizes double conversion online technology and a sine waveform. Featuring a capacity of 454 VAh, the included battery has a recharge time of three hours. Two communication ports are also present, including one USB Type-A and one RJ45. This UPS uses a 2 RU form factor allowing it to fit compatible server racks using the included mounting hardware. The integrated SmartSlot can also be used with other optional hardware for greater control.

Battery Failure Notification Provides early-warning fault-analysis on batteries, enabling timely preventive maintenance. ECO Mode Operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection. Green Mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD Graphics Display Text and mimic diagrams that display modes of operation, system parameters, and alarms. Rack/Tower Convertible Protects the initial investment in the UPS when migrating from tower to rackmount environment. Automatic Self Test Periodic battery self test ensures early detection of a battery that needs to be replaced. Disconnected Battery Notification Warns when a battery is not available to provide backup power. Audible Alarms Provides notification of changing utility power and UPS power conditions Predictive Failure Notification Provides early-warning fault analysis ensuring proactive component replacement. User-Replaceable Batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Plug-and-Play External Batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Flash Upgradeable Firmware Install maintenance releases of firmware remotely using FTP. Temperature-Compensated Battery Charging Prolongs battery life by regulating the charge voltage according to battery temperature. Intelligent Battery Management Maximizes battery performance, life, and reliability through intelligent, precision charging. Scalable Runtime Allows additional run time to be quickly added as needed. Automatic Restart Automatically starts up the connected equipment upon the return of utility power. Hot-Swappable Batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Automatic Internal Bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. SmartSlot Customize UPS capabilities with management cards. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Serial Connectivity Provides management of the UPS via a serial port. LED Status Indicators Quickly understand unit and power status with visual indicators. Network Manageable Provides remote power management of the UPS over the network. Includes Powerchute Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Resettable Circuit Breaker Easy recovery from overloads with no need to replace a fuse. Power Conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Input Power Factor Correction Minimizes installation costs by enabling the use of smaller generators and cabling. Safety-Agency Approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Cold-Start Capable Provides temporary battery power when the utility power is out. Frequency and Voltage Regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Generator Compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. UPC: 731304323068

Total Outlets	8 x NEMA 5-20R 1 x NEMA L5-30R
Plug Type	NEMA L5-30P
USB Charging Ports	None
SmartSlot Interface	1
Data Line Protection	None
Communications	USB via Type-A Serial via RJ45
Emergency Power Off (EPO) Support	Yes
Topology	Double Conversion

Surge Energy Rating	340 Joules
Maximum Current	24 A
Maximum Wattage	2700 W
Nominal Input Voltage	120 VAC
Input Frequency	50/60 Hz ± 10 Hz (Auto Sensing)
Nominal Output Voltage	120 VAC
Output Frequency	50/60 Hz (Configurable)
Voltage Distortion	<2%
Load Capacity	3000 VA
Circuit Breaker Rating	30 A
Thermal Dissipation	805 BTU/Hour
Crest Factor	3:1
Waveform	Sine Wave

Battery Capacity	454 VAh
Chemistry	Lead-Acid
Charging Time	3 Hours
User Replaceable	Yes
Replacement Battery	SRT96RMBPUS
Hot-Swap Support	Yes

Operating Temperature	32 to 104°F / 0 to 40°C
Operating Humidity	0 to 95%
Storage Temperature	5 to 113°F / -15 to 45°C
Storage Humidity	0 to 95%
Operating Altitude	0.00 to 9842' / 0 to 3000 m
Storage Altitude	0.00 to 49,212' / 0 to 15,000 m
Noise Level	55 dBA
Certifications	CSA, ENERGY STAR, FCC, REACH, RoHS, as per Manufacturer

Cable Length	8' / 2.44 m
Rackmount Size	2 RU (with Included Hardware)
Dimensions (W x H x D)	17.01 x 3.35 x 24.06" / 432 x 85 x 611 mm
Weight	70.55 lb / 32 kg

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.