- Controller for Cruiser TTL 500 Monolight
- Compatible with Sony ADI / P-TTL
- Frequency: 2.4 GHz
- Range: 328'
- 8 Channels; 3 Groups
- Control Output, Beep & Modeling Light
- 1st & 2nd Curtain Sync
- Backlit LCD & Micro-USB Port
- Runs on Two AAA Batteries
Get the most out of your Cruiser TTL 500 Monolight with this shoe-mounted Impact Cruiser Wireless Controller for Sony cameras. This wireless 2.4 GHz transmitter enables remote control and ADI / P-TTL communication from the camera to the light, including support for both 1st & 2nd curtain sync. It features an impressive range of 328' and has access to eight channels to limit interference. Also, the controller can set up three groups for added control and can remotely access flash output in 1/10-stop increments, turn on/off the sound alert, and set the modeling light power. These settings are easily seen and set via a backlit LCD and a micro-USB port is available for future firmware updates. For power, it accepts two easily-found AAA batteries and the shoe mount is locking for added security.
- Designed specifically for the Cruiser monolight, this transmitter is compatible with Sony ADI / P-TTL to provide support for automatic metering and communication between the camera and a light, including support for both 1st & 2nd curtain sync.
Note : a7R III and a7S have to be set to Fill-Flash mode to be compatible. All other cameras have to be in Wireless (WL) flash mode.
- Using a 2.4 GHz frequency this trigger can reach ranges of up to 328' and it has access to eight channels to limit interference.
- Three light groups can be configured and users can perform exposure compensation for TTL mode or manual power control in manual mode. Manual offers control over output in precise 1/10-stop increments. Also, users can turn on/of the sound alert and set modeling light power from the controller.
- A backlit LCD provides a clear, easy-to-understand view of the current settings.
- The controller is powered by two easily found AA batteries.
- A locking shoe mount ensures it is securely attached to the camera.
- Future firmware updates can be installed via a micro-USB port.
UPC: 847628002098
Wireless |
Channels | 8 |
Groups | 3 |
Wireless Range | 328' / 100 m |
Radio Frequency | 2.4 GHz |
Physical |
Dimensions | 3 x 2.4 x 2" / 7.6 x 6 x 5.2 cm (Transmitter) |
Weight | 3.2 oz / 90.7 g |
Packaging Info |
Package Weight | 0.3 lb |
Box Dimensions (LxWxH) | 5.7 x 4.5 x 2.0" |
In the Box
Impact Cruiser Wireless Controller for Sony Cameras
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.