Synco Mic-D1 Hypercardioid Shotgun Microphone

For Indie Films, TV & Documentaries

100-Hour AA Battery or Phantom Powered

Hypercardioid Polar Pattern

Switchable 180 Hz High-Pass Filter

Shotgun Microphone Review - SYNCO Mic-D1

The Synco Mic-D1 is a battery-/phantom-powered shotgun microphone featuring a hypercardioid polar pattern to deliver sharpened frontal focus and side rejection compared to supercardioid shotguns, allowing it to capture clear, quality dialogue and sound effects for independent filmmakers, videographers, and broadcasters as well as vloggers and YouTubers.

The microphone's XLR output and included XLR cable enable standardized hookup to mic preamps, mixers, and a variety of portable audio recorders, while the supplied XLR to 3.5mm cable is optimal for connecting the Mic-D1 to a mirrorless camera or DSLR. It can be operated via 48V phantom power or a single AA battery (available separately), which allows up to 100 hours of run time.

With strong sensitivity and high maximum SPL handling, the Mic-D1 provides robust distortion-free signal. Its circuit offers a switchable 180 Hz high-pass filter designed to reduce problematic low-frequency signals such as rumble. The lightweight body is constructed from CNC-machined brass for improved resistance to interference and durability. The matte black finish reduces reflectivity to ensure visual discretion during video shoots.

Tight Sound Pickup Whereas traditional shotgun mics use supercardioid polar patterns, the Mic-D1 utilizes a hypercardioid pickup pattern to provide even tighter frontal focus, more attenuation at the sides, and slightly increased rear pickup, making it an ideal choice for recording in indoor or outdoor environments.

The Mic-D1's circuit employs a switchable 180 Hz high-pass filter to attenuate common sources of low-frequency buildup such as rumble, allowing its tone to complement sound effects as well as dialogue. Battery or Phantom Powered The Mic-D1 is compliant with 48V phantom powering for use with field recorders, external mic preamps, and professional camcorders. Alternatively, a single AA battery (available separately) can power the Mic-D1 for up to 100 hours when using the mic with devices that don't supply phantom power�mirrorless cameras, DSLRs, and passive mixer adapters. XLR Output and Multiple Cables The balanced 3-pin XLR output features gold-plated contacts to improve conductivity and maintain the integrity of your signal. Use the included XLR cable to connect the Mic-D1 to a preamp that can supply 48V phantom power or opt for the supplied XLR to 3.5mm cable to plug the Mic-D1 directly into a camera or portable audio recorder that doesn't provide phantom power. Ideal for Boompole Mounting Lightweight and just over 11" long, the Mic-D1 is well suited for use on a boompole or mic stand. It includes a mic holder with 5/8" and 3/8" options for mounting versatility. Windscreen Minimizes Wind Noise The Mic-D1 includes a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. UPC: 619660478762

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Pressure Gradient
Capsule	1 x Electret Condenser
Polar Pattern	Hypercardioid
Orientation	End Address
Circuitry	Solid-State
Pad	None
High-Pass Filter	180 Hz
Tone Adjustment	None
Indicators	None
On-Board Controls	High-Pass Filter
Windscreen	Foam (Included)

Frequency Range	40 Hz to 20 kHz
Maximum SPL	130 dB SPL
Impedance	500 Ohms (Phantom Power) 600 Ohms (Battery Power)
Sensitivity	-34 dBV/Pa at 1 kHz (Phantom Power) -32 dBV/Pa at 1 kHz (Battery Power)
Dynamic Range	106 dB (Phantom Power, 1 kHz, at Max SPL) 91 dB (Battery Power, 1 kHz, at Max SPL)
Signal-to-Noise Ratio	78 dB (1 kHz)

Output Connectors (Analog)

1 x XLR 3-Pin Male (on Mic)

Operating Voltage	48 V (Phantom Power) 1.5 V (Battery Power)
Battery Type	1 x AA
Approximate Battery Life	100 Hours

Color	Black
Mounting	3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction Material	Brass
Dimensions	ø: 0.83 x L: 11.22" / ø: 2.11 x L: 28.5 cm
Weight	7.3 oz / 207 g

Package Weight	2.47 lb
Box Dimensions (LxWxH)	17.5 x 6.9 x 2.8"

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.