Earthworks M23R Overview
Basic Tips for Recording Audio for Video | Audio for Video, Part 1Choosing a Mic for Video Production | Audio for Video, Part 2How to Get Great Audio Levels | Audio for Video, Part 3Recording Sound to Your Camera vs. an Audio Recorder | Audio for Video, Part 4
The M23R from Earthworks is a reference microphone for SMAART, MLSSA, Spectrafoo software, TEF and RTA, and all audio-band measurements. It has a flat frequency response, can handle high SPL values, and exhibits a low amount of self-noise.
The company is well known and respected for its reliable reference and measurement microphones. The M23R offers the same frequency response, polar pattern characteristics, and sensitivity values across its entire operating range. Furthermore, the mic can withstand a wide range of extreme temperatures, making it durable.
Small element provides an accurate omnidirectional pattern with an even, coherent response at the direct and off-axis sections of the microphone capsule
Wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail
Uncolored, flat signal results in accurate room calibration for indoor and outdoor application
Requires 48V phantom power to operate
Every M23R has the same frequency response and sensitivity, matched to within ±0.5 dB across the entire operating frequency range (3 Hz to 23 kHz).
UPC: 827517293769
In the Box
- Earthworks M23R Measurement Microphone
- Mic Clip
- Limited 10-Year Warranty
Earthworks M23R Specs
Microphone
Primary Applications |
Room/Speaker Calibration |
Form Factor |
Stand/Boom Mount |
Sound Field |
Mono |
Capsule |
Condenser |
Polar Pattern |
Omnidirectional |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
None |
Tone Adjustment |
None |
Gain Adjustment |
None |
Indicators |
None |
On-Board Controls |
None |
Windscreen |
None |
Performance
Frequency Range |
3 Hz to 23 kHz ±0.5 dB |
Maximum SPL |
140 dB SPL |
Impedance |
65 Ohms (Balanced) |
Load Impedance |
600 Ohms |
Sensitivity |
36 mV/Pa |
Equivalent Noise Level |
20 dB SPL A-Weighted |
Connectivity
Output Connectors (Analog) |
1 x XLR 3-Pin (on Mic) |
Headphone Connector |
None |
Power
Bus Power |
None |
Operating Voltage |
24 to 48 V (Phantom Power) |
Operating Current Consumption |
10 mA |
Physical
Color |
Stainless Steel |
Mounting |
Mic Clip (Included) |
Included Case |
None |
Included Filters |
None |
Operating Temperature |
-4 to 140°F / -20 to 60°C |
Operating Humidity |
90% |
Storage Temperature |
-4 to 176°F / -20 to 80°C |
Dimensions |
ø: 0.9 x L: 6.5" / ø: 22 x L: 165 mm |
Weight |
0.5 lb / 227 g |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.