E-Image Motus Overview
The E-Image 3-Stage Carbon Fiber Tripod System with Fluid Head and 100mm Leveling Ball features a fluid head with continuously variable counterbalance, two telescopic pan handles, heavy-duty carbon fiber tripod legs, a mid-level spreader, a set of three rubber feet, a hard-sided case, and a padded bag. The fluid head has a payload capacity of up to 70.5 lb with support for DSLR setups, ENG, and digital cinema cameras. It has eight steps of pan and tilt drag and independent locks for each axis. The head features a heavy-duty quick release plate that pops into the head and slides within the camera platform for balance. The head also features an illuminated bubble level and has two rosettes for pan handles.
The fluid head attaches to the 3-stage tripod via a 100mm bowl interface. With the head attached, the tripod offers a height adjustment of 21.9 to 59.45" and collapses to 29.3". The mid-level spreader and rubber feet hold the tripod legs in position, providing rigidity and stability, and the tripod system packs into the padded bag for easy transportation.
Fluid Head
Supports up to 70.5 lb of camera and rig
The counterbalance is controlled by a crank and features a numerical readout of the counterbalance setting from 0 to 100% of the heads payload capacity
Pan and tilt each have independent locks and selectable drag settings from 1 to 8
Two included pan handles mount to either side of the head providing two-hand operation for handling larger cameras
Tripod Legs
Lightweight carbon fiber construction is rigid and corrosion resistant
Removable mid-level spreader is well suited for working on flat as well as uneven terrain. The mid-level spreader allows you to work with the tripod places over obstruction and surfaces as uneven as stair cases (always safety the tripod when working on stairs)
Foot spikes provide grip in soft ground, while the removable rubber feet cover the spikes and give purchase when working on hard, slippery, or delicate surfaces
In the Box
- E-Image 3-Stage Carbon Fiber Tripod System with Fluid Head and 100mm Leveling Ball (Payload 70.5 lb)
- 3 x Rubber Feet
- 2 x Pan Handle
- Fluid Head
- Quick Release Plate
- Head Fitting Tie-Down Knob
- Hard Case
- Carbon Fiber Tripod
- Mid-Level Spreader
- Limited 1-Year Warranty
E-Image Motus Specs
Camera Plate
| Camera Plate Features |
Quick Release, Sliding Balance Plate |
| Camera Mounting Screw |
2 x 1/4"-20 Male
2 x 3/8"-16 Male |
| Balance Plate Sliding Range |
4.7" / 119.38 mm |
| Safety Lock |
Yes |
| Plate Dimensions |
9.4 x 2.3 x 0.4" / 238.76 x 58.42 x 10.16 mm |
Head
| Base Mount |
100 mm Half Ball |
| Counter Balance |
Continuous 100-Step Plus 0 (0 to 48.5 lb / 0 to 31.98 kg) |
| Pan Handle Fittings |
2 x Rosette |
| Included Pan Handle Length |
16.7 to 24" / 42.42 to 60.96 cm |
| Bubble Level |
1 x Illuminated |
| Base Diameter |
3.94" / 100 mm |
Pan & Tilt
| Drag Control |
Pan: Stepped 4-Step
Tilt: Stepped 8-Step |
| Drag Type |
Fluid |
| Vertical Tilt |
+90° to -67° |
| Independent Pan Lock |
Yes |
| Independent Tilt Lock |
Yes |
Legs
| Leg Lock Type |
Lever Lock |
| Leg Positions |
Continuously Adjustable |
| Independent Leg Spread |
Yes |
| Leg Sections |
3 |
| Feet Features |
Spiked |
| Spreader |
Mid-Level (Included) |
General
| Load Capacity |
70.55 lb / 32 kg |
| Maximum Working Height |
59.45" / 151 cm |
| Minimum Working Height |
21.85" / 55.5 cm |
| Folded Length |
29.33" / 74.5 cm |
| Materials |
Carbon Fiber |
| Weight |
14.77 lb / 6.7 kg |
Packaging Info
| Package Weight |
55 lb |
| Box Dimensions (LxWxH) |
40 x 18.25 x 17" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
