35.3 lb Capacity Arrowx 1 Fluid Head1 x Pan HandleSprinter II 2-Stage Aluminum Tripod23.7 to 66.6" Height Range The Miller Arrowx 1 Sprinter II 2-Stage Aluminum Alloy Tripod System with Mid-Level Spreader includes an Arrowx 1 fluid head with 1 x pan handle, a Sprinter II 2-stage aluminum alloy tripod with 100mm bowl, a mid-level spreader, Rubber foot pads, and a soft case. The Arrowx 1 fluid head supports up to 35.3 pounds and employs CB Plus technology, providing 8 positions of counterbalance plus a half-step selector switch for fine tuning. The head also features 5+0 levels of pan and tilt settings, and 4.7" of camera plate travel.
The head is matched with the 2-stage Sprinter II aluminum alloy tripod, and together the system has a height range of 23.7 to 66.6" . The included mid-level spreader is well suited for working on uneven or rocky terrain and allows your tripod to remain stable on such uneven surfaces as stairs. The soft case features a triangular shape and extra-wide opening, and it includes a built-in head cradle to protect your tripod.
Miller Arrowx 1 Fluid Head (100mm)
The versatile Miller Arrowx 1 Fluid Head accommodates a wide payload range of 0 to 35.3 lb using 16 steps of counterbalance. Pan, tilt, and counterbalance can all be set to zero to support even the lightest cameras. This pro video head offers five steps each of pan and tilt drag plus zero and counterbalance with CBPlus for precise control. The side-load Euro plate has a 4.7" sliding range and features easy drop-in mounting without the alignment issues posed by rear-loading designs.
The CBPlus counterbalance system features eight larger steps for quick setup plus interspersed half steps for fine-tuned control. The "one-flick" switch used to activate the half steps is positioned at the front of the head near the pan and tilt locks, keeping all the controls centrally located. Constructed from a lightweight yet durable aluminum alloy with composite polymers, the Arrowx 1 head has an illuminated bubble level and pan/tilt controls. Its 100mm ball base may be removed for 3/8"-16 mounting on a slider or other flat support. The Arrowx 1 head includes a telescoping pan handle and can be used with an optional second pan handle.
Features
- Wide 0 to 35.3 lb payload range
- Five steps of pan and tilt drag
- 16 steps of counterbalance with CB Plus for precision control
- Quick release, side-load Euro plate with 4.7" sliding range
- Fluid drag system with smooth, soft start and stops
- Centrally grouped controls at front/left side of head
- Illuminated bubble level and pan/tilt controls
- Precision caliper locks for bounce-free on/off usage
- Removable half ball for flat base mounting on 3/8"-16 sliders
- Mitchell base adaptable
- Includes one telescoping pan handle
- Robust aluminum and composite build
- Side mounting points for viewfinder supports and accessories
Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
The Miller Sprinter II 2-Stage Alloy Tripod is a quick-setup solution for a tripod head with 100mm ball base. Its light weight, flip-locks, and rigid construction allow for durability without compromising usability in ENG, EFP, and other pro video applications. Unlike many traditional multi-stage designs, both flip-locks are located on the same section for easy reaching, no matter the height setting. The fast setup is complemented by an in-line carry handle, for portability on set or in the field. Compatible spreaders, rubber feet, and dollys are available separately.
Miller 993 Mid-level Spreader
The Miller 993 is a mid-level spreader for Sprinter, Arrow 25/40 and HD tripod systems. This device offers variable adjustment in minimum and maximum height settings and a latch and swivel design.
Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
The 475 Tripod Feet from Miller are a set of three rubber snap-on feet designed to be used in any situation where the integrated dual spiked feet are not optimal. They are ideal for use on both slippery and glossy floors. These rubber feet are compatible with all tripods with a 993 mid level spreader.
Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
Store, transport, and protect your gear with the black Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems . The case features zipper closure, top and bottom cradles with straps to secure your tripod, and back pack straps with a storage pocket. For strength and durability, the case is constructed with a ballistic nylon shell and hard plastic skid pads. Carry the case with the dual strap handles or padded grab handle. You can also attach a sold-separately shoulder strap to the case D-links. An external pocket and card holder makes case identification easier.
| Camera Plate Features | Quick Release, Sideload, Sliding Balance Plate |
| Camera Plate Type | 120 mm Euro Plate |
| Camera Mounting Screw | 1 x 1/4"-20 Male
1 x 3/8"-16 Male |
| Balance Plate Sliding Range | 4.72" / 120 mm |
| Safety Lock | Yes |
| Plate Dimensions | 3.13 x 2.56 x 0.24" / 79.5 x 65 x 6 mm |
| Base Mount | 100 mm Half Ball |
| Drag Control | Pan: Stepped 5-Step Plus 0
Tilt: Stepped 5-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Material | Aluminum, Composite |
| Load Capacity | 0 to 35.27 lb / 0 to 16 kg |
| Counter Balance | Incremental 15-Step Plus 0 |
| Pan Handle Fittings | 2 x Rosette |
| Included Pan Handle Length | 15.35 to 23.23" / 390 to 590 mm |
| Bubble Level | 1 x Illuminated |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Dimensions | 9.33 x 7.64 x 7.48" / 237 x 194 x 190 mm |
| Weight | 6.39 lb / 2.9 kg |
| Package Weight | 12.565 lb |
| Box Dimensions (LxWxH) | 18.1 x 14.6 x 12.3" |
| Head Mount Type | 100 mm Bowl |
| Load Capacity | 100 lb / 45 kg |
| Maximum Working Height | 60.4" / 153 cm |
| Minimum Working Height | 17.3" / 44 cm |
| Folded Length | 27.6" / 70 cm |
| Materials | Aluminum |
| Weight | 8.3 lb / 3.8 kg |
| Package Weight | 9.9 lb |
| Box Dimensions (LxWxH) | 37.3 x 12.9 x 11" |
| Construction | Alloy |
| Type | Mid-Level |
| Adjustable | Continuously variable through all height settings |
| Minimum Length | 12.4" (315mm) |
| Maximum Length | 20.3" (515mm) |
| Weight | 1.7 lbs (0.75kg) |
| Package Weight | 2.385 lb |
| Box Dimensions (LxWxH) | 18.35 x 6.55 x 6.4" |
| Dimensions | L: 3.7" / L: 95 mm |
| Weight | 8 oz / 210 g |
| Package Weight | 0.65 lb |
| Box Dimensions (LxWxH) | 7.35 x 5.85 x 5.2" |
| Material | Ballistic nylon outer shell |
| Type of Closure | Zipper |
| Padded | Yes |
| Carrying/Transport Options | Dual top handles and padded end handle
D-links for optional, user-supplied shoulder strap
Back pack straps |
| Dimensions | 37.8 x 10.2 x 12.6" / 96.0 x 26.0 x 32.0 cm |
| Weight | 9.7 lb / 4.4 kg |
| Package Weight | 12.68 lb |
| Box Dimensions (LxWxH) | 39 x 13.75 x 12" |
In the Box
- Miller Arrowx 1 Fluid Head (100mm)
- Miller 860 Quick Release Plate
- Miller Telescopic Pan Handle for ArrowX Heads
- Locking Handle
- Limited 3-Year Warranty
- Miller Sprinter II 2-Stage Alloy Tripod (Mid-Level Spreader Ready)
- Miller 993 Mid-level Spreader
- Miller 475 Rubber Feet Pads for Select Tripods (Set of 3)
- Miller Arrowx softcase 2 Stage for Sprinter II and Toggle 2 Stage Tripod Systems (Black)
- Back Pack Straps
- Limited 3-Year Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
