Miller CiNX 3 Overview
- 1 Description
- 2 Miller CiNX 3 Fluid Head
- 3 Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl
- 4 Miller Mitchell Base Adapter for Skyline 70 Fluid Head
- 5 Miller AX Accessory Mounting Block for AX and Arrow Fluid Heads
The Miller CiNX 3 Fluid Head Kit features the CiNX 3 fluid head, several key accessories, and a resin transit case with custom-cut foam. The foam provides a dedicated slot for each of the included components of this kit.
The CiNX 3 natively has a flat base, and when purchased separately it comes with a 100mm bowl adapter. This kit includes the 100mm adapter plus a 150mm bowl adapter. Furthermore, it includes a Mitchell base adapter. Between the flat base and three adapters, you get the versatility to use the head with virtually any tripod.
When bought separately, the head is supplied with a telescoping pan handle. In this kit, the pan handle is included, and a second, articulated one is added, along with a serrated extender for it. Lastly, the kit includes an accessory mounting block that lets you attach a viewfinder, monitor, or other accessory to the fluid head. It attaches to the head and allows you to mount up to 6.6 lb loads via 1/4"-20 and 3/8"-16 threads.
Miller CiNX 3 Fluid Head
The Miller CiNX 3 Fluid Head is designed with a strength-to-size ratio that provides an optimal solution for the supported load capacity of 2.2 to 41.8 lb. The CiNX 3 features a 3/8"-16 threaded flat base and includes a 100mm bowl claw adapter; optional 150mm bowl or Mitchell base adapters from Miller are also supported.
The CiNX 3 head features 16 steps of counterbalance and 6 steps of pan and tilt fluid drag. The drag and counterbalance systems offer progressive and equal increments of drag and torque to ensure ultra-soft starts and stops and balanced diagonal transitions. The pan/tilt controls and a bubble level are all illuminated at the press of an illumination button. The CiNX 3 comes with a GP23A type battery already installed for illumination but supports multiple other types as you will find in the user manual.
For ultimate efficiency with heavy cameras, the CiNX 3 has a sideload camera plate platform with a safety lock, and it comes with an ARRI-type camera plate that can be adjusted approximately 6". It also includes a rosette-mount telescopic pan handle while supporting two in total for dual-handed operation. On the sides, it provides four anti-twist ARRI accessory mounts. The head is made of lightweight yet high-strength die-cast aluminum and rigid composite polymers. It's finished with a durable black ripple and anti-corrosive pretreatment. It also has water- and dust-resistant sealing.
The head also has a very wide operating temperature range of -40 to 149°F.
Key Features
- Fluid drag system with smooth start and soft stop technology and balanced diagonal transitions
- 3/8"-16 threaded flat base
- Includes a 100mm bowl claw adapter (optional 150mm bowl or Mitchell base adapters supported)
- 16 steps counterbalance
- Payload range of 2.2 to 41.8 lb
- 6 steps of pan and tilt drag; illuminated controls
- Sideload platform with safety lock
- 5.9" camera plate sliding range
- Four anti-twist ARRI accessory mounts
- Illuminated bubble level
- Pan handle included; optional second one supported
- Wide operating temperature range of -40 to 149°F
Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl
Mount your flat-based ArrowFX fluid head onto a tripod with a 150mm bowl using this D150 Claw Ball Level Adapter from Miller . This durable metal alloy adapter attaches to the flat base of the ArrowFX head or other compatible head via three M5 threads or four 3/8" universal mounting holes. The adapter is secured onto the tripod using the long center screw and a D150 clamp assembly that tightens with a locking nut. The center screw is removable if you require a different screw length for your tripod.
Miller Mitchell Base Adapter for Skyline 70 Fluid Head
The Miller Mitchell Base Adapter allows the Skyline 70 Fluid Head to be connected with a Mitchell base and can be used with heavy-duty Mitchell tripods.
Miller AX Accessory Mounting Block for AX and Arrow Fluid Heads
Mount additional accessories like a viewfinder, monitor, or light onto your AX or Arrow tripod fluid head with this AX Accessory Mounting Block from Miller . This solid metal alloy block attaches to your fluid head, allowing you to mount up to 6.6 lb of accessories using its 1/4"-20 and 3/8"-16 mounting threads.
In the Box
- Miller CiNX 3 Fluid Head
- Miller ARRI Camera Plate for Cineline 70 Fluid Head
- Miller 698 Telescopic Pan Handle with Clamp for Cineline 70 and Skyline 70 Head
- Miller D100 Claw Ball Level Adapter for ArrowFX Fluid Head and 100mm Bowl
- Limited 3-Year Warranty
- Miller Articulated Pan Handle with Extender for Cineline 70 Fluid Head (15")
- Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl
- D150 Clamp Nut Assembly
- Limited 3-Year Warranty
- Miller Mitchell Base Adapter for Skyline 70 Fluid Head
- Miller AX Accessory Mounting Block for AX and Arrow Fluid Heads
- Miller Resin Transit Case for CiNX Head
- Miller Resin Transit Case for CiNX Head
Table of Contents
- Description
- Miller CiNX 3 Fluid Head
- Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl
- Miller Mitchell Base Adapter for Skyline 70 Fluid Head
- Miller AX Accessory Mounting Block for AX and Arrow Fluid Heads
Miller CiNX 3 Fluid Head Specs
Camera Plate
| Camera Plate Features | Quick Release |
| Camera Plate Type | Sideload Plate |
| Camera Mounting Screw | 2 x 3/8"-16 Male |
| Balance Plate Sliding Range | 5.91" / 150 mm |
| Safety Lock | Yes |
| Plate Dimensions | 10.24 x 3.76 x 0.46" / 260 x 95.5 x 11.7 mm |
Tripod Platform
| Base Mount | 100 mm Half Ball
3/8"-16 Female |
Pan & Tilt
| Drag Control | Pan: Stepped 5-Step Plus 0
Tilt: Stepped 5-Step Plus 0 |
| Drag Type | Fluid |
| Vertical Tilt | +90° to -75° |
| Panning Range | 360° |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
Physical
| Material | Aluminum, Composite |
| Load Capacity | 2.2 to 41.8 lb / 1 to 18.96 kg |
| Counter Balance | Incremental 15-Step Plus 0 |
| Pan Handle Fittings | 2 x Rosette |
| Bubble Level | 1 x Illuminated |
| Accessory Mounting | 4 x ARRI Accessory Mount Female |
| Operating Temperature | -40 to 149°F / -40 to 65°C |
| Weight | 8.4 lb / 3.81 kg |
Miller Articulated Pan Handle with Extender for Cineline 70 Fluid Head (15") Specs
General
| Accessory Type | Pan handle for tripod head |
| Length | 1.2 ft |
| Weight | 25.39 oz |
Kit Content
| Kit Content | (1) x pan handle
(1) x clamp extender |
Miller D150 Claw Ball Level Adapter for ArrowFX Fluid Head and 150mm Bowl Specs
Kit Content
| Material of Construction | Metal Alloy |
| Mounting | Base: 150 mm Bowl
Head: 3 x M5 Threads and 4 x 3/8" Holes |
| Dimensions | 5.9 x 1.1" / 150 x 27 mm |
| Weight | 1.2 lb / 544.3 g |
Packaging Info
| Package Weight | 1.78 lb |
| Box Dimensions (LxWxH) | 5.9 x 5.9 x 4.05" |
Miller Mitchell Base Adapter for Skyline 70 Fluid Head Specs
| Payload Capacity | 200.0 lb (90.7 kg) |
| Mounting Base | Mitchell |
Packaging Info
| Package Weight | 1.78 lb |
| Box Dimensions (LxWxH) | 6.95 x 6.8 x 3.25" |
Miller AX Accessory Mounting Block for AX and Arrow Fluid Heads Specs
Kit Content
| Material of Construction | Metal Alloy |
| Payload Capacity | 6.6 lb / 3 kg |
| Dimensions | 1.6 x 1 x 2.2" / 40 x 25 x 55 mm |
| Weight | 4.6 oz / 131.5 g |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
