Texas Instruments SN74VMEH22501DGGR Bus Transceiver 8 Channels 64 mA 3.15 V to 3.45 TSSOP-48

The SN74VMEH22501DGGR is a 8-bit Universal Bus Transceiver and two 1-bit bus transceivers with 3-state outputs. It is designed for 3.3V VCC operation with 5V tolerant inputs. The UBT� transceiver allows transparent, latched and flip-flop modes of data transfer and the separate LVTTL input and outputs on the bus transceivers provide a feedback path for control and diagnostics monitoring. The high-speed backplane operation is a direct result of the improved OEC� circuitry and high drive that has been designed and tested into the VME64x backplane model. The B-port I/Os are optimized for driving large capacitive loads and include pseudo-ETL input thresholds (1/2 VCC ±50mV) for increased noise immunity. These specifications support the 2eVME protocols in VME64x (ANSI/VITA 1.1) and 2eSST protocols in VITA 1.5. With proper design of a 21-slot VME system, a designer can achieve 320Mbytes transfer rates on linear backplanes and, possibly, 1Gbyte transfer rates on the VME320 backplan

• Member of the Texas Instruments Widebus� family
• Bus transceiver split LVTTL port provides a feedback path for control and diagnostics monitoring
• I/O Interfaces are 5V tolerant
• Ioff, Power-up 3-state and BIAS VCC support live insertion
• Bus hold on 3A-port data inputs
• Flow-through architecture facilitates printed circuit board layout
• Distributed VCC and GND pins minimize high-speed switching noise
• Latch-up performance exceeds 100mA per JESD 78, Class II
• 26R Equivalent series resistor on 3A ports and Y outputs
• Green product and no Sb/Br

Applications

Communications & Networking

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN74VMEH22501DGGR
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.