BASSBOSS AT212-MK3 3200W Powered 12" 2-Way Coaxial Loudspeaker

What's New

MK3 Amp Update

• There are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90-250V provides more flexibility. Waterproof connections provide more peace of mind.

MK3 Enhanced DSP

• The MK3 features an all-new 96 kHz DSP. The pushbutton presets have doubled, from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible.

ControlBASS Software

• ControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating.

Advanced Speaker Design

The AT212-MK3 is a vented cabinet that features two high-efficiency 12� woofers. The woofers feature 3.5� voice coils, Neodymium magnets, cast aluminum baskets and ultralight cones. The compression driver also features a Neodymium motor structure with a 3� voice coil. It is mated to a 1.4� throat, cast aluminum horn. The horn is rotatable, providing 80 x 60 degree coverage for multiple applications including ground stack and horizontal or vertical flying.

Plug-and-Play

The AT212-MK3 is the ultimate in plug-and-play, with universal voltage compatibility and no need for any outboard gear, other than a sound source. The built-in processing features presets that allow it to run in multiple configurations. Each preset offers advantages that suit specific applications and preferences.

Remarkable Constuction

• Power is supplied by an amplifier that can deliver output peaks of 163V, to provide amazing dynamic resolution and impact. The fully integrated and comprehensive digital processing ensures smooth response and reliable operation thanks to meticulous filter alignments and five-stage limiters that protect the drivers from excessive excursion, thermal overload and clipping. The amplifier features a large heat sink and 2 temperature-controlled fans to ensure consistent operation, even under the most extreme conditions.
• The cones are waterproofed to protect them from accidental exposure to moisture such as rain or spilled beverages. Weather-resistant, IP65-rated power connectors, an internally sealed input section and waterproof-treated cones are provided to allow operation where rain might be encountered.
• The cabinet is built from 18 and 15mm Birch plywood. It features an 18mm baffle and 18mm top and bottom, with 15mm sides, port walls and braces, all assembled with dado joinery. The cabinet includes 4 steel bar-handles, 4 internally braced steel M10 fly points and a 35mm (1-3/8�) cast metal pole socket. Although the AT212 cabinet is equipped with a 35mm steel pole socket, DO NOT use this speaker on a tripod or extension pole. This socket is to be used with a special, short section of pole to prevent it from moving once stacked on a subwoofer.

Comprehensive Digital Signal Processing

• On-board presets provide a variety of high-pass filters to suit full-range operation through a variety of settings that maximize SPL when used with a subwoofer. The sealed enclosure provides the flexibility to choose between low-frequency extension or high-SPL operation from the same compact loudspeaker.
• The proprietary BASSBOSS processing ensures exceptional sound quality thanks to its premium quality, high-fidelity electronics. Its ultra-low noise CODECS, 96 kHz sampling rate processor and high-resolution amplification are some of the finest in the industry.

etherCON Interface

• The new DSP features an Ethernet interface that can be used to control the cabinets from a computer or to load software or firmware updates. The ethernet connectivity in conjunction with the DSP board allows signal to be sent via Milan AVB. Firmware updates will provide access to this feature.
• Within the software, multiple cabinets can be grouped together, allowing them to respond to commands simultaneously. This permits the levels of multiple loudspeakers to be adjusted together and yet independently from the levels of other groups of loudspeakers. In addition to individual and grouped level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet includes a two-port switch so multiple cabinets can be chained on the same data cable.
• The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch of a button with no need for a connected computer. The eight directly accessible presets are compatible with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs.

Neutrik powerCON True 1 TOP

New to the MK3 are Neutrik powerCON True 1 TOP (Total Outdoor Protection) waterproof mains connectors. Waterproof mains connectors along with a totally isolated input connection section and cones that are waterproofed make the MK3 series the powered loudspeakers that can be used outdoors without fear of what the weather will bring. (Or used indoors without fear of what the partiers bring.)

BASSBOSS AT212 Mk3 Specs

Configuration	Active 3-Way
Enclosure Type	Bass-Reflex Loudspeaker
Total Power Capacity	3200 W
HF Driver	1 x 3" / 76.2 mm Horn-Loaded Compression Driver with 1.4" / 35.6 mm Throat
MF Driver	No
LF Driver	2x 12" / 30.5 cm Woofer
Wireless Connectivity	No
Color	Black

Enclosure Type	Bass-Reflex Loudspeaker
Total Power Capacity	3200 W
Amplifier Power Rating	LF: 1 x 2400 W RMS HF: 1 x 800 W RMS
Amplifier Class	Class-D

HF Driver	1 x 3" / 76.2 mm Horn-Loaded Compression Driver with 1.4" / 35.6 mm Throat
MF Driver	No
LF Driver	2x 12" / 30.5 cm Woofer
LF Voice Coil	3.5" / 8.9 cm
Magnet	Neodymium

Frequency Response	50 Hz to 18 kHz ±3 dB
Maximum SPL	136 dB (Continuous) 142 dB (Peak)
Coverage Angle	80° H x 60° V (Rotatable Horn)

Audio I/O	1x XLR 3-Pin Female Balanced Line Input 1x XLR 3-Pin Male Balanced Line Thru
Network I/O	2x etherCON (Control/Network) In/Out
USB I/O	No
Wireless Connectivity	No
Bluetooth	No
Mobile App Compatible	No

EQ	No
Parametric EQ	No
Semi-Parametric EQ	No
Filters	No
Dynamic Processing	Limiter
Alignment Delay	No
Phase Adjustment	No
Digital Signal Processing	User Settings, Venue Settings, Voicing Modes (Adjustable via Optional Software)
Maximum Sampling Rate	96 kHz / 24-Bit

AC Input Power	100 to 240 VAC, 50 / 60 Hz
AC Power I/O	1x PowerCON TRUE1 Input (Locking)
Current Consumption	120 VAC: 4.6 A 240 VAC: 2.3 A

Color	Black
Mounting	1 x 1.4" / 35 mm Pole Socket (Bottom) 4 x M10 Fly Point
Handles	4
Environmental Resistance	No
Construction Material	Plywood, Polyurethane, Steel
Dimensions	48 x 18 x 14.5" / 121.9 x 45.7 x 36.8 cm
Weight	99 lb / 44.9 kg

Package Weight	96 lb
Box Dimensions (LxWxH)	50.25 x 20.5 x 17.8"