BASSBOSS ZV28-MK3 5000W Powered Dual 18" Extended Depth Subwoofer

What's New

MK3 Amp Update

• There are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90-250V provides more flexibility. Waterproof connections provide more peace of mind.

MK3 Enhanced DSP

• The MK3 features all-new 96 kHz DSP. The push-button presets have doubled from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters, and multiple protection systems and limiters to prevent driver overload in as many ways as possible.

ControlBASS Software

• ControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets, which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating.

Advanced Power

The ZV28-MK3 features a 5000W amplifier with an autosensing globally compatible power supply that can run on input voltages anywhere between 90 and 250 Volts. Full output power is available on anything over 110V. The amplifier's peak output voltage provides for intense, high-SPL hits, while its sustained output is unparalleled in its ability to deliver liquid lows. The amplifier is passively cooled via its external heat sink and by woofer-generated airflow through the port. When necessary, four fans provide additional forced-air cooling capacity during more extreme conditions.

Neutrik powerCON True 1 TOP

New to the MK3 are Neutrik powerCON True 1 TOP (Total Outdoor Protection) waterproof connectors. Waterproof connectors, a totally isolated input connection section, and cones that are waterproofed allow the MK3 series powered loudspeakers to be used outdoors without fear of what the weather will bring (or used indoors without fear of what the partiers wll bring).

Advanced 18" Drivers

• Dual 18" woofers with neodymium motors and with massive 4.5" voice coils
• Neodymium magnets provide higher intensity and efficiency, resulting in a lighter and louder cabinet than those with ferrite drivers

Comprehensive Digital Signal Processing

The comprehensive suite of processing includes high-pass and low-pass filters, and multiple protection systems and limiters to prevent driver overload in as many ways as possible, including thermal, excursion, and clipping. The five levels of protection actively prevent the voice coil from overheating, minimize long-term thermal compression, and limit excursion. Because they operate in 5 different modes, the limiters are sophisticated enough to have a largely unnoticeable effect on the transient response and allow the subwoofer to deliver peak output safely.

etherCON Interface

• The new DSP features an Ethernet interface that can be used to control the cabinets from a computer or to load software or firmware updates. Ethernet connectivity in conjunction with the DSP board allow signal to be sent via Milan AVB. Firmware updates provide access to this feature.
• Within the software, multiple cabinets can be grouped together, allowing them to respond to commands simultaneously. This permits levels of multiple loudspeakers to be adjusted together and yet independently from the levels of other groups of loudspeakers. In addition to individual and grouped level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet includes a two-port switch, so multiple cabinets can be chained on the same data cable.
• The MK3 DSP features a storage capacity of up to 100 presets, eight of which can be accessed at the touch of a button with no need for a connected computer. Eight directly accessible presets are compatible with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and subs.

BASSBOSS ZV28 Mk3 Specs

Configuration	Active Dual Subwoofer
Enclosure Type	Bass-Reflex Subwoofer
Total Power Capacity	5000 W
MF Driver	No
LF Driver	2x 18" / 45.7 cm Woofer
Wireless Connectivity	No
Color	Black

Enclosure Type	Bass-Reflex Subwoofer
Total Power Capacity	5000 W
Amplifier Power Rating	2 x 2500 W
Amplifier Class	Class-D

MF Driver	No
LF Driver	2x 18" / 45.7 cm Woofer
LF Voice Coil	4.5" / 11.4 cm
Magnet	Neodymium

Frequency Response	23 Hz to 90 Hz ±3 dB
Maximum SPL	134 dB (Continuous) 137 dB (Peak)

Audio I/O	1x XLR 3-Pin Female Balanced Line Input 1x XLR 3-Pin Male Balanced Line Thru
Network I/O	2x etherCON (Control/Network) In/Out
USB I/O	No
Wireless Connectivity	No
Bluetooth	No
Mobile App Compatible	No

EQ	No
Parametric EQ	No
Semi-Parametric EQ	No
Filters	No
Dynamic Processing	Limiter
Alignment Delay	No
Phase Adjustment	No
Digital Signal Processing	User Settings, Venue Settings, Voicing Modes (Adjustable via Optional Software)
Maximum Sampling Rate	96 kHz / 24-Bit

AC Input Power	100 to 240 VAC, 50 / 60 Hz
AC Power I/O	1x PowerCON TRUE1 Input (Locking)
Current Consumption	120 VAC: 9 A 240 VAC: 4.5 A

Color	Black
Mounting	2 x 1.4" / 35 mm Pole Socket (Side, Top)
Handles	4x Each Side
Cooling	Convection, Fan (Variable Speed), Heat Sink
Environmental Resistance	No
Construction Material	Plywood, Polyurethane, Steel
Dimensions	42 x 42 x 22.5" / 106.7 x 106.7 x 57.1 cm
Weight	235 lb / 106.6 kg

Package Weight	267 lb
Box Dimensions (LxWxH)	45 x 43 x 24"