Claypaky Mini Xtylos Laser-Powered Beam Moving Head

At a Glance

• Light source: tailor-made RGB laser engine, enclosed in a sealed module
• Long lasting light source (20,000 hours) with minimal decay
• Laser-based system with derating to preserve laser diodes
• Total output: 1.5Mcd with 1° beam aperture
• Solid, flat field, saturated, ultra-concentrated light beam without any visible hotspots
• Exclusive mid-air graphic effects (BLazer effects)
• Aperture: 1-4° range
• RGB additive color mixing, with exclusive TURBO COLORS
• Linear virtual CTO 3000 � 9000K
• Unequalled color consistency both across different fixtures and during lifetime
• One wheel with 2 rotating prisms (Pyramid 16 facets, Linear 6 facet) and 1 frost filter
• Unmatched effect and color change speed
• Motorized focusing to zoom in the prism and the frost
• Ultra-precise 24-bit digital dimmer
• High-speed, digital stop-strobe effect
• Extremely compact housing
• DMX channels: 27 control channels
• Control protocols: DMX, Art-Net, RDM, sACN
• Built-in Web Server
• DMX and RDM connectors: locking 5-pin XLR IN/OUT
• Ethernet port: RJ45 IN
• Power connector: PowerCON True1 In/Out
• CloudIO ready: fully compatible with CloudIO

High Energy Efficiency

Its power consumption and luminous efficacy are excellent. The laser engine power consumption is 12W, the equivalent of a low-consumption fixture, but the resulting light output easily exceeds any high-power beam moving light.

Full Beam with No Hot Spots

A special patent-pending design optical system turns the laser-emitted light into a solid, dense, saturated light beam without any visible hotspots. The beam aperture ranges from 1 to 4°, resulting in pencil beams that are of exceptional intensity, and cannot be reproduced by any other light sources, either LED or traditional.

Exclusive Turbo Color System

The Mini Xtylos uses laser technology with RGB additive color mixing. In contrast to the subtractive mixing used with discharge lamps, colored light beams are as bright as a white light beam. With the Mini Xtylos, you always have a Turbo-Red, a TurboBlue, and a Turbo-Green at your disposal, together with all their combinations, which are infinitely brighter than those produced by a traditional bulb. Color consistency is literally unequalled both across different fixtures and during lifetime. Lighting designers will finally be able to create their shows making extensive use of colors, without fear of them being overwhelmed by the rest of the lighting rig.

Amazing Mid-Air Effects

The range of effects is very wide and complete: one effect wheel with two rotating and interchangeable prisms and one interchangeable frost filter. These effects are enhanced by the laser source and by the visibility of the aerial colors, giving rise to never-seen-before mid-air effects.

Unmatched Dynamism

Effect and color changes alternate virtually instantaneously, in such a way that they are difficult for the human eye to perceive. Besides allowing lighting scenes to be changed very quickly and accurately, the speed of this change itself can be used as a breath-taking effect.

Safe Sealed Laser Module

The laser unit is housed in a safe, sealed module, which is not accessible to users. This module produces a beam of light with incredible optical characteristics: bright, perfectly collimated, uniformly mixed, and evenly distributed across its section. Unlike some discharge lamp fixtures, its beam comes with a negligible amount of heat, so there is no risk of heating up scenery and objects.

Small Dimensions

An extraordinarily compact housing, together with the most advanced electronics on the market, make the Mini Xtylos extremely fast and responsive to pan-tilt movements. Its compact size means it can be easily installed on pre-rigs or housed inside the Clay Paky Igloo for fixed outdoor installations.

Long-Lasting Source without Decay

The laser source lasts for approximately 20,000 hours (equivalent to over 12 years of average use by a rental company) with minimal decay in luminous efficacy. This is a significant technology improvement, which results in an excellent ROI for rental companies.

Internal Modularity

The laser module is easily accessible and replaceable at the end of its life. The electronic module is a disjointed unit and it may be replaced separately from the light source, if faulty.

Applications

The Mini Xtylos is definitely the most dynamic light on the market. It is ideal tool for all rental companies, for use at major events, and at any show, which would like to stand out with colorful beams and never-seen-before effects. It is also perfect for permanent installations in theme parks and TV studios.

The Mini Xtylos is the first moving head light with a laser source, and this opens up new, surprising prospects for the development of the entire entertainment lighting world.

Claypaky Mini Xtylos Specs

Fixture Type	Moving Head
Light Source	1x Laser Diode
Colors	Red (Laser) Green (Laser) Blue (Laser) CTO (Color Temperature Orange)
Laser	1x Red 1x Green 1x Blue Laser Class: 3B
Beam Angle	1 to 4°
Control Protocols	DMX512, RDM, Art-Net, sACN
AC Input Power	100 to 240 VAC, 50/60 Hz
Power / Current Consumption	120 VAC: 90 W
Mounting	Omega Bracket

Fixture Type	Moving Head
Light Source	1x Laser Diode
Expected Lamp Life	20,000 Hours
Colors	Red (Laser) Green (Laser) Blue (Laser) CTO (Color Temperature Orange)
Laser	1x Red 1x Green 1x Blue Laser Class: 3B
Color Temperature	3000 to 9000K
Lumen Output	292 Lumens
Beam Angle	1 to 4°
Shutter / Strobe	Electronic
Iris	No
Focus	Motorized
Zoom Adjustment	Motorized, 1 to 4°
Dimming	Electronic, 0 to 100%
Prism	6-Facet Linear (Rotating) 16-Facet (Rotating)

Operating Modes	DMX, Move-in-Black, Program
Macros / Programs	No
Effects	Animated Patterns Color Scroll Color Strobe Light Beams Move-in-Black Shapes Strobe
Gobos	1x Removable Metal Gobo 1x Fixed Gobo
Gobo Size	Outer Diameter: 0.7" / 19 mm Max Image Size: 0.6" / 14.5 mm Max Thickness: 0" / 1.1 mm

Tilt Ranges	260°
Pan Ranges	Continuous
Pan/Tilt Inversion	Yes
Movement Resolution	0.3°

Control Protocols	DMX512, RDM, Art-Net, sACN
DMX Channel Modes	1 Mode(s): 27-Channel
Display / Controls	LCD / 5-Button
Remote Control	No
Mobile App Compatible	No

Inputs/Outputs	1 x XLR 5-Pin DMX Input 1 x XLR 5-Pin DMX Output 1 x etherCON/RJ45 DMX/Data/Network Input/Output
Wireless	No

AC Input Power	100 to 240 VAC, 50/60 Hz
AC Power Connector	Input: 1x powerCON TRUE1 Output: 1x powerCON TRUE1
Fuse	No
Power / Current Consumption	120 VAC: 90 W

Mounting	Omega Bracket
Included Accessories	1x Power Cable
Duty Cycle	No
Exterior Color	Black
Cooling	Fan (Variable Speed), Forced Convection, Heat Sink
Certifications	cETLus
Dimensions	16.3 x 9.6 x 6.7" / 415 x 244 x 170 mm
Weight	20 lb / 9.1 kg