The D2-HB-SOLAR Power Saver Heater Blower Enclosure for Solar Applications from Dotworkz protects cameras by using a low-wattage heater �ring� that goes all the way around the camera (360� horizontal) and is affixed directly to the dome lens, having 4W of direct heating. This allows the solar version to keep the lens clear of fogging more efficiently.
- For actual operations of the camera at temperatures below 40�F, upgrading to the Ring of Fire is recommended due to its de-icing and defrosting circuitry to remove ice and snow around the lens of the enclosure
- For actual operations of the camera at temperatures above 100�F, upgrading to the CoolDome is recommended with its thermo-electric cooling system that actively reduce the inside temperature for up to 50�F from outside temperatures
- IP and analog camera compatible
- Water and air tight functionality makes it suitable for harsh environments
- Simple design compatible with 99% of PTZ cameras 1
Please Note:
For a detailed list of compatible cameras, please visit Dotworkz website
close
- Thermoplastic fiber composite construction; will not rust or corrode and is shock resistant
- Onboard component mounting space for: routers, cell networks, hard drives, UPS, WiMAX, mesh hardware, etc
- Heavy-duty lower lens for impact resistance
| Certifications | NEMA 4X / IP66 |
| Operating Temperature | -20 to 145�F (-29 to 63�C) |
| Humidity | 10 to 90% non-condensing |
| Source | 12 VDC nominal (9.5 to 14 VDC) |
| Power Consumption | < 7 W peak (not including camera load) |
| Dimensions | Exterior (L x H x W): 14.9 x 13.4 x 11.7" (37.8 x 34.0 x 29.7 cm) |
| Weight | 8 lb (3.6 kg) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
