NovaStar MX30-SF LED Display Controller for ATS-Pro

The MX30-SF supports precise adjustment to hue, saturation, and brightness of black, white, and the 12 derived standard RGB colors of the red, green, and blue primary colors.

The unit is compatible with NovaStar's high-precision calibration system and the C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity and improving the image quality.

NOTE: This function requires pairing with the A10s Pro receiving card and a C3200 camera for full grayscale calibration.

The unit automatically adjusts the driver IC parameters according to your camera's shutter angle to fix problems of black lines, grayscale addition, and grayscale loss during camera shooting in xR scenarios.

The MX30-SF supports HLG and HDR10 and complies with the SMPTE ST 2084 and SMPTE ST 2086 standards.

NOTE: When using HDR and an A10s Pro receiving card, load capacity is reduced.

The controller supports low latency without reducing load capacity. Latency is 0 frames (less than 1 ms) in SendOnly controller working mode and 1 frame in All-In-One Controller working mode. Additional latency options are available: zero to two frames of latency can be added at the controller.

NOTE: Low latency cannot be used with the Genlock feature.

For optimal display quality in various scenarios, users can adjust display parameters such as layers, brightness, color temperature, and gamma ahead of time and save them as presets. Users can save up to 128 customizable presets which can be easily applied or switched with just one click.

There is no rectangle restriction for irregular screens. When calculating resolutions, blank pixels do not count towards the total capacity. The used load capacity of Ethernet ports is the sum of the pixels of all cabinets.

The MX30-SF automatically adapts to video inputs with different frame rates ranging from 23.98 to 240, and supports the automatic calculation of optimal screen parameters based on the input source's frame rate. This ensures that the brightness deviation of the screen remains within 5% across different frame rates, and it also supports precise frame rate adjustment in 0.01 Hz increments.

Note: This function requires pairing with the A10s Pro receiving card.

• In the Send-Only Controller mode, the latency can be reduced by one frame
• In the All-In-One Controller mode, the layer and scaling functions are available

• The device can be connected to the VMP software to provide easy and convenient operations and smart device management
• SNMP and Art-Net protocols supported
• Cascading control via Ethernet
• The Gigabit Ethernet control ports support TCP/IP protocol and star topology
• No switch or router is needed to deploy multiple devices on the same LAN via device cascading as the network switching function is already built in
• Hardware monitoring capabilities that encompass fan speed, module temperatures, voltage levels, and operational status
• It automatically detects and reports any device faults or alarm information, ensuring real-time monitoring of the LED screen's operational status

NovaStar MX30-SF Specs

Inputs	1 x HDMI 2.0 Female 1 x HDMI 1.4 Female 1 x DisplayPort 1.1 Female 2 x BNC 3G-SDI Female
Outputs	10 x RJ45 Ethernet 1 x HDMI 2.0 (Loop) 1 x HDMI 1.4 (Loop) 2 x BNC 3G-SDI (Loop) 1 x Optical Fiber 10G (Ethernet 1-10) 1 x Optical Fiber 10G (Copy Optical 1) 1 x Optical TOSLINK S/PDIF
Other I/O	1 x BNC (Genlock, Input) 1 x BNC (Genlock, Loop Output) 2 x RJ45 Ethernet (Control) 1 x RJ45 Auxiliary (Control, RS-232) 1 x USB-A (Settings Export)
Display	3.5" TFT LCD
Presets	128
Video Format	HDMI 2.0: Up to 4096 x 2160p60: 23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60 / 72 / 75 / 85 / 100 / 119.88 / 120 / 143.86 / 144 / 240 Up to 8192 x 1080p60 (Scaled/Forced) Up to 1080 x 7680p60 (Scaled/Forced) HDMI 1.4: Up to 4096 x 1080p60: 23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60 / 72 / 75 / 85 / 100 / 119.88 / 120 / 143.86 / 144 / 240 Up to 4096 x 1080p60 (Scaled/Forced) Up to 1080 x 4096p60 (Scaled/Forced) DP 1.1: Up to 4096 x 1080p60: 23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60 / 72 / 75 / 85 / 100 / 119.88 / 120 / 143.86 / 144 / 240 Up to 4096 x 1080p60 (Scaled/Forced) Up to 1080 x 4096p60 (Scaled/Forced) 3G-SDI: Up to 1920 x 1080p60: 23.98 / 24 / 25 / 29.97 / 30 / 47.95 / 48 / 50 / 59.94 / 60
HDR	HDR10, HLG
HDCP	2.2/1.4/1.3 Compliant
SMPTE Compliance	ST 2084, ST 2086, ST-424 (3G), ST-292 (HD), ST-259 (SD)
EDID Management	Yes
Video Standard Compliance	ST-424(3G), ST-292(HD) & ST-259(SD)
Power Input	100-240 VAC, 50/60 Hz, 0.8 A
IP Rating	IP20
Certifications	FCC
Power Consumption	55 W
Operating Temperature	-4 to 122°F / -20 to 50°C
Operating Humidity	0 to 80%
Storage Temperature	-22 to 176°F / -30 to +80°C
Storage Humidity	0 to 95%
Dimensions	19 x 18.4 x 3.7" / 482.6 x 466.7 x 94.2 mm
Weight	15.9 lb / 7.2 kg