Pelco DSSRV2-160RD-D Digital Sentry H.264 Network Video Recorder (16TB, US Power Cord)

The 16TB DSSRV2-160RD-D Digital Sentry H.264 Network Video Recorder from Pelco �is optimized to deliver essential hardware support for the DS NVs video management software (VMS) without the risk of integrating hardware and software.�

Boosted by the 4th Generation Intel Xeon processor and 16 GB of RAM, the Digital Sentry NVR provides an optimal combination of processing power and reliability to meet the demands of HD video recording and playback operations. The system is powered to support up to 128 combined IP and analog video streams, with up to 64 analog cameras supported via the optional ENC5416 directly attachable encoder (sold separately). Analog streams are also supported using Pelco and third-party encoders.�

The NVR delivers total available throughput of 350Mb/s for recording of analog and IP video streams as well as playback and export through the DS ControlPoint client. When determining the maximum number of cameras and the desired frame rate to host on every system, the number of concurrent client connections, the number of streams likely to be viewed in playback on each client, and the bandwidth required to support the client connections must be taken into consideration.�

The NVR functions as a stand-alone system or as part of a network of servers, monitored from the DS ControlPoint user interface. The system can be deployed solely as a network video recorder, as a digital video recorder (DVR), or as a hybrid NVR.�

Thanks to the 2 gigabit network ports, handy network architecture planning is facilitated by allowing 1 port to be dedicated to IP cameras, while the second network port is used for client connections. 2 DVI-D ports provide a convenient connection for high-resolution digital monitors for use with HD cameras.�

The NVR incorporates a SSD system drive. With increased read-write speeds and no moving parts, the SSD system drive increases the reliability, uptime, and responsiveness of the system. The 16TB SSD drive is hot-swappable when configured for internal RAID 5 storage with the optional RAID 5 controller card (sold separately). External storage is supported through USB attached storage or by using the DSSRV-SCSI interface card (sold separately) connected to DX8100HDDI storage of up to 24TB. The external storage can be configured for JBOD storage of software-controlled RAID 5 storage. The unit comes with a US power cord.

Front panel LED displays on the recorder provide heads-up information on system operation. The LEDs are integrated with the new Digital Sentry System Information (DSSI) utility, providing critical, real-time statistics on system resource utilization, temperature, and throughput status. This unit is DIACAP (Department of Defense (DoD) Information Assurance Certification and Accreditation Process) certified.

Pelco DSSRV2-160RD-D Digital Sentry H.264 Network Video Recorder (16TB, US Power Cord)

System
Supported Standards	NTSC/PAL
Processor	Intel Xeon E3-1275 v3
Operating System	Windows 7 Ultimate 64-bit SP1
Internal Memory	16 GB DDR ECC RAM
User Interface	DS ControlPoint
Internal Storage	RAID 5: 16 TB The minimum configuration for an internal RAID 5 is 3 hard disk drives. A hard disk drive of the RAID 5 configuration is used for parity, reducing net storage capacity by 1 hard disk drive
RAID Level	Internal RAID 5 (requires DS-SRV-RAID controller card for hot-swappable drives) DSSRV-RAID controller sold separately. The internal RAID 5 requires re-imaging from a bootable 8 GB USB key (sold separately).
External Storage	Pelco's DX8100HDDI or third-party SCSI targets (requires optional DSSRV-SCSI) Card sold separately.
System Drive	SSD
Storage	6 x 3.5" hard drive bays
Optical Drive	DVD�RW
USB Ports	3 x USB 2.0 ports (1 x front, 2 x rear), 2 x USB 3.0 ports (rear)

Video
Video System	Intel HD Graphics P4700 (shared memory)
Maximum Resolution	3840 x 2160 per DisplayPort output (2x) 1920 x 1200 @ 60 Hz on DVI-D output 1920 x 1200 @ 60 Hz on VGA output
Video Outputs	Supports up to 3 simultaneous displays using any combination of the four outputs
Video Standards	60 Hz capable for NTSC
Decoding	MPEG-4 ASP; H.264 Baseline, Main, and High profiles
Performance	16x real-time MPEG-4 streams at 704 x 480 12x real-time H.264 Baseline profile streams at 704 x 480 4x H.264 Baseline profile streams at 720p 2x real-time H.264 Baseline profile streams at 1080p

Audio
Audio Decoding	G.711 speech codec
Bit-Rate	64 kb/s
Audio Level	Input: Electret microphone Output: Up to 3 Vp-p, adjustable, minimum load of 8 ohms
Audio Connectors	2 x 3.5 mm stereo jacks
Tips	Signal left (input and output)
Ring	Signal right (input and output)
Audio Inputs	Microphone
Audio Outputs	Speaker or line out

Network
Interface	2 Gigabit Ethernet RJ-45 (1000Base-T)

Front Panel Controls
Buttons	Power
Indicators	Unit Status: Green, amber, red Primary Network: Green, amber, red Secondary Network: Green, amber, red Software Status: Green, amber, red (based on diagnostics) Hard Disk Status: Green, red, off (behind bezel)

Power
Power Input	100 to 240 VAC, 50/60 Hz, auto-ranging
Power Supply	Internal
Power Consumption	Operating Maximum: 100 VAC / 50 Hz: 222.0 W, 2.22 A, 758.0 BTU/h 110 VAC / 50 Hz: 224.0 W, 2.02 A, 759.4 BTU/h 110 VAC / 60 Hz: 223.0 W, 2.03 A, 761.4 BTU/h 115 VAC / 50 Hz: 217.0 W, 1.89 A, 740.8 BTU/h 115 VAC / 60 Hz: 215.5 W, 1.87 A, 735.7 BTU/h 220 VAC / 50 Hz: 213.0 W, 0.97 A, 727.2 BTU/h 220 VAC / 60 Hz: 204.1 W, 0.93 A, 696.8 BTU/h 240 VAC / 50 Hz: 211.9 W, 0.88 A, 723.4 BTU/h 240 VAC / 60 Hz: 207.6 W, 0.86 A, 708.8 BTU/h

Environmental
Operating Temperature	50 to 95�F (10 to 35�C)
Storage Temperature	-40� to 149�F (-40 to 65�C)
Operating Humidity	20 to 80%, non-condensing
Maximum Humidity Gradient	10% per hour
Operating Altitude	-50 to 10,000' (-15 to 3,048 m)
Operating Vibration	0.25 G at 3 to 200 Hz at a rate of 0.5 octave/minute To prevent performance failure and unit damage, make sure the temperature at the unit is continuously within the operating temperature range.
Certifications	CE, Class A; meets EN50130-4 standard requirements FCC, Class A UL/cUL Listed C-Tick CCC KCC S-Mark

Physical
Dimensions (DxWxH)	20 x 17.1 x 3.5" (50.8 x 43.4 x 8.9 cm)
Weight	32 lb (14.5 kg)