Samsung 980 Internal SSD Overview
Built using their V-NAND 3-bit MLC NAND flash technology and Pablo controller, the 1TB 980 PCIe 3.0 x4 M.2 Internal SSD from Samsung offers an M.2 2280 form factor and a PCIe 3.0 x4 / NVMe 1.4 interface to deliver sequential read speeds of up to 3500 MB/s and sequential write speeds of up to 3000 MB/s. Users will also have access to encryption via AES 256-bit, TCG/Opal 2.0, and MS eDrive, while a TBW (Total Bytes Written) rating of 600TB helps ensure a long operational life. This SSD also features a smart thermal solution to effectively manage heat, as well as a nickel coating and a heat spreader. Additionally, thanks to Full Power Mode, which is enabled through Samsung's Magician software, the 980 can run with no latency, so you can easily switch between interfacing with large, intensive work files or graphics-heavy games.
General Features
Upgrade to Impressive NVMe Speeds
Harness your system's potential with the 980. Whether you need a boost for gaming or a seamless workflow for heavy graphics, the 980 is a smart choice for SSD performance and it's all backed by an NVMe 1.4 interface and PCIe 3.0 x4 technology.
Packed with Speed
Satisfy your need for speed with PCIe 3.0 x4 using HMB technology and an NVMe 1.4 interface for high efficiency. The 980 delivers value, with sequential read speeds of up to 3500 MB/s and sequential write speeds of up to 3000 MB/s.
Keep Moving with Full Power Mode
Keep your SSD running at its peak with Full Power Mode, which drives continuous and consistent high performance. Enable Full Power Mode through Samsung Magician software to keep your SSD in active mode with no latency, so you can instantly jump back into large, intensive work files or graphics-heavy games.
Built for the Long Run
Keep your files safe with an SSD that's in it for the long haul. With up to 600TB TBW and a limited 5-year warranty, the 980's optimized endurance comes with trusted reliability thanks to Samsung's in-house solutions, from the advanced controller to V-NAND and the latest firmware.
Reliable Thermal Control
High-performance SSDs usually require high-performance thermal control. To help ensure stable performance, the 980 uses nickel coating to help manage the controller's heat level and a heat spreader label to deliver effective thermal control of the NAND chip.
Smart Thermal Solution
Embedded with Samsung's thermal control algorithm, the 980 manages heat on its own to deliver durable and reliable performance, while minimizing performance fluctuations during extended usage.
Samsung Magician Software
Unlock the full potential of the 980 with Samsung Magician's advanced, yet intuitive optimization tools. Monitor drive health, optimize performance, protect valuable data, and receive important updates with Magician to ensure you're always getting the best performance out of your SSD.
![]()
UPC: 887276437194
In the Box
- Samsung 1TB 980 PCIe 3.0 x4 M.2 Internal SSD
- Limited 5-Year Warranty
Samsung 980 Internal SSD Specs
Performance
| Interface |
PCIe 3.0 x4 |
| Write Speed |
Random: 480,000 IOPS
Sequential: 3000 MB/s |
| Read Speed |
Random: 500,000 IOPS
Sequential: 3500 MB/s |
Physical
| Drive Type |
SSD |
| Form Factor |
M.2 2280 |
| Flash Controller |
Samsung Pablo |
| Flash Memory Type |
Multi-Level Cell (MLC) |
Reliability / Data Integrity
| Encryption |
256-Bit AES Hardware Encryption |
| Endurance (Total Bytes Written) |
600 TB |
Electrical
| Power Draw |
4.6 W (Active)
5.3 W (Max)
5.0 mW (Standby) |
General
| Dimensions (W x H x D) |
0.87 x 0.09 x 3.14" / 2.21 x 0.23 x 7.98 cm |
| Weight |
0.3 oz / 9 g |
| Warranty Length |
Limited 5-Year Warranty |
Packaging Info
| Package Weight |
0.17 lb |
| Box Dimensions (LxWxH) |
5.7 x 3.9 x 0.9" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
