Thor 16QAM Overview
If you need to decode over-the-air or cable QAM signals to integrate them into your IP streaming workflow, the 16 x QAM Cable Tuners to IPTV Gateway from Thor is a single box that can convert DVB-C QAM Annex A or B signals to IPTV signals into a TS, SPS, multicast, or unicast output stream. This 1 RU rackmount unit features 16 QAM inputs that support various source signals such as antenna, satellite dish, or cable TV for broadcast facilities.
The unit features two RJ45 Ethernet outputs for either IP TS or SPTS mode with converted subchannels or MPTS mode with a single stream, and it can support up to 512 IP inputs and output a single MPTS stream via the ASI ports. There are also 16 QAM loop outputs on the back of the unit. A dedicated management Ethernet port allows you to configure and manage the unit.
16 independent off-air QAM tuners input to IP TS SPTS multicast or unicast outputs
16 RF loop outputs per tuner
One IP (MPTS) output over UDP or RTP
512 IP SMPTs output over UDP or RTP
16 groups multiplexing + 16 groups scrambling + 16 groups QAM modulating
PSI/SI editing and inserting
16 RF to IP or 16 RF to IP + 16 RF (any combination)
Full IP control and Network Management through browser
Thor 16QAM Specs
Video Inputs |
16 x Coax Female |
Audio Input Connectors |
None |
Video Outputs |
16 x Coax Female (Loop Output) 2 x RJ45 Female |
Audio Output Connectors |
None |
Standards
HDR Compatibility |
None |
Other I/O |
1 x RJ45 LAN Input/Output 1 x USB-A Firmware Input |
Expansion Slots |
None |
Power
Power I/O |
1 x IEC C14 Input |
Power Consumption |
Device: 100 to 220 VAC (25 W) |
Environmental
Operating Temperature |
32 to 77°F / 0 to 45°C |
Storage Temperature |
-4 to 176°F / -20 to 80°C |
General
Dimensions |
19 x 11.8 x 1.8" / 482 x 300 x 44.5 mm |
Weight |
8.2 lb / 3.7 kg |
Thor 16QAM Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.