₹ 18105.0 includes GST and import duties. | |
B2B customers can avail ₹ 2761.01 ITC on this product | |
100% Secure Payments | 100% Genuine product | |
The product is eligible for Free Shipping |
Description
Xvive Audio U2 Overview
Styled in a 3-tone sunburst finish, the Xvive Audio U2 is a digital wireless system for transmitting your guitar signal to and from your amplifier or pedalboard. The system consists of two pieces: a transmitter that plugs into your guitar, and a receiver that connects to your amplifier or pedalboard.
Operating on the 2.4 GHz ISM band, the U2 transmits audio at 48 kHz / 24-bit, giving you a frequency response of 20 Hz to 20 kHz; thus, the full tonal range of your guitar can be broadcast in all its luster, with a latency of only 5 ms. Onboard lithium-ion batteries last approximately five hours per charge. The system is usable while charging.
The transmitter and receiver are fashioned out of ABS plastic to ensure durability. The 1/4" plugs rotate 300° to accommodate all manner of guitar jacks. Controls on both units allow you to facilitate pairing, and LED indicators let you know you're connected and ready to rock�or, if the situation calls for it, roll.
In the Box
- Xvive Audio U2 Digital Wireless System for Electric Guitars (3-Tone Sunburst, 2.4 GHz)
- U2 Guitar Transmitter
- U2 Guitar Receiver
- Dual-USB Cable
Xvive Audio U2 Specs
Wireless Technology | Digital 2.4 GHz |
Included Transmitters | 1 x Plug-On |
RF Channel Scanning | Auto-Scan |
Max Operating Range | 70' / 21.3 m (Line of Sight) |
Max Transmitters per Band | 4 |
Sample Rate/Resolution | 48 kHz / 24-Bit |
Latency | 5 ms |
Dynamic Range | 103 dB |
SNR | 103 dB |
THD | 0.2 % |
Receiver Type | Plug-In |
Number of Audio Channels | 1 |
Audio I/O | 1 x 1/4" TS Unbalanced Output |
Frequency Response | 20 Hz to 20 kHz |
USB/Lightning Connectivity | Micro-USB Female (Bus Power, Charging) |
Power Requirements | Battery |
Battery Type | 1 x Built-In Rechargeable |
Battery Charging Time | 2 Hours |
Approx. Battery Life | 5 Hours (Rechargeable) |
DC Input Power | 5 VDC (USB Bus Power) |
Housing | ABS |
Dimensions | 3 x 1.7 x 1.2" / 75 x 44 x 30 mm |
Weight | 1.4 oz / 40 g |
Transmitter Type | Plug-On |
RF Output Power | Not Specified by Manufacturer |
Audio I/O | 1 x 1/4" TS Male Unbalanced Input |
Included Cable Connector | None |
Muting | Mute Switch |
Sync Method | Proprietary |
Power Requirements | Battery |
Battery Type | 1 x Built-In Rechargeable |
Battery Charging Time | 2 Hours |
Approx. Battery Life | 5 Hours |
USB/Lightning I/O | 1 x Micro-USB (Bus Power, Charging) |
Housing | ABS |
Dimensions | 3 x 1.7 x 1.2" / 7.5 x 4.4 x 3 cm |
Weight | 1.4 oz / 40.7 g |
Package Weight | 0.55 lb |
Box Dimensions (LxWxH) | 7.4 x 3.9 x 2" |
Xvive Audio U2 Reviews
Enjoying, testing, no surprises so far.
Both electric bass and guitar were perfect. Martin acoustic with battery powered bridge pickup had the expected buzz. This was expected, but still makes me sad. :-). The units are fine, but delicate feeling enough I am very protective of them. Have been warned that they are sensitive to moisture/ rain, and to be very careful. So for the price, they are great around the house/ studio. Not ready to trust them live.
Works great. Excellent value!
I purchased the Xvive wireless guitar system based on a number of positive YouTube reviews. I figured for the price that it would be worth it if I could get it to work. I first tried it by inserting the transmitter into my PRS and the received into my Mesa Boogie amp directly. Worked perfectly. I didn't mess around with selecting a channel so I suppose it just worked with the default selection. I next plugged the receiver into an overdrive pedal and the pedal was plugged in with a cable to the amp. Again it worked like a charm and there was no noticeable difference compared to using the pedal and amp with a cable. Later on I did play around with selecting a different channel on the transmitter. It takes a little getting used to, but the device beeps the 1-4 times depending on what channel it's on. You have to set the receiver to the same channel to get the system to work. There is no light to tell you that the two are on the same channel so you just have to keep pressing the channel button to get them to sync. Anyway, if you don't have a second guitar using the same wireless system it's best just to leave it in channel 1 and leave it alone. It will work well. While playing I moved around the house and it definitely has great range. It was fun moving into different parts of the house without worrying about getting tangled up in a long guitar cable.
Awesome product for the price.
Works great
I Like This
I was using the Line6 relay G10. It worked fine, but this is so much simpler. G10 needed separate power for receiver. The U2 simplifies.
Doesn't sync for active pickup
The unit worked fine at first and then about two days later it stopped syncing and I can't get any of the transmitter and receiver to sync. With each other I need help.
Finally...Love It
Bought these to connect my Zoom H5n to my DLSR. Of course I had to have a 1/8 adapter for the receiver to go into my DLSR. Audio sync automatically with no issues using the default channel. I am using other 2.4 wireless devices but these babies work perfectly with zero interruptions. I�ve tried quite a few products and had to return them all due to sound dropping in and out. Unless I happen to break them, I don�t see a need to try anymore products. It feels good to finally get the wireless connection I�ve been needing to step my game up!
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
Quantity | Price |
2 | ₹ 17742.9 |
3-5 | ₹ 17561.85 |
5-10 | ₹ 17199.75 |
10+ | ₹ 16837.65 |
Bulk discount will be automatically applied during checkout based on quantity.