- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
- +85 to -65° Tilt Range
- 100mm Half Ball
- Mid-Level Spreader
The Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots. The legs are made from aluminum and feature three leg sections. The head and legs come with a mid-level spreader, and the system is height-adjustable from 32 to 67.5". To aid in leveling your shot, a bubble level is incorporated into the head. The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes.
- The sliding balance plate features a total of four inches of balance adjustment, two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.
- The head incorporates a small stud at the front that prevents the balance plate from sliding out.
- The included mid-level spreader prevents the tripod's legs from flying apart, and is well suited for use one even and uneven surfaces. You can use the mid-level spreader to secure your legs on rocky terrain, as well as on stairs, unlike a ground level spreader, which would prove unstable.
| Payload | 35 lb / 16 kg |
| Counterbalance | Fixed |
| Drag Mode | Two-step |
| Tilt Angle | +85° / -65° |
| Camera Plate | Sliding |
| Sliding Range | ±2" / 50 mm |
| Plate Attachment | Two 3/8"-16 screws |
| Spare Screw | 3/8"-16 |
| Section | Two-stage |
| Bubble Level | Non-illuminated |
| Ball Diameter | 100 mm |
| Temperature Range | -4 to 140°F / -20 to +60°C |
| Height | 32.0 to 67.5" / 81.3 to 171.4 cm |
| Weight | 16.3 lb / 7.4 kg |
| Packaging Info |
| Package Weight | 24.0 lb |
| Box Dimensions (LxWxH) | 39.0 x 11.6 x 10.7" |
In the Box
Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
