MID49 Mid Cage Kit for Red V-RAPTOR

The Arca-Type Top Mount from MID49 mounts on your RED KOMODO, KOMODO-X, or V-RAPTOR camera via the included mounting screws. Take advantage of the integrated center Arca-Swiss standard slot to mount an optional Arca-type Top Hande or Arca-type Top Plate directly from the top or by sliding it in from the back. The mount also has 1/4"-20 and 3/8"-16 threads with ARRI locating pins and M4 x 20mm holes for mounting accessories. An optional Top Mount adapter kit enables you to mount this on a Kinefinity MAVO mark2.

This Arca Top Handle from MID49 is a lightweight sliding camera handle that mounts on MID49 Arca Top Mounts for RED KOMODO, KOMODO-X, and V-RAPTOR, as well as the Sony BURANO Top Plates, and Upper Cages. Featuring numerous 1/4"-20 and 3/8"-16 mounting holes that are surrounded by ARRI-compatible anti-twist divots so that accessory arms and accessories don't slip or twist. Multiple M4x20mm threaded holes allow for attaching option rod brackets and other M4 accessories. It has a cold shoe mount on both the front and rear for on-camera lights, microphones, and other shoe accessories.

This 4.48"-long MID49 Arca-Type Top Plate is a lightweight top plate that attaches to the Arca-Type Top Mount for RED Komodo, Komodo-X, and V-Raptor, as well as Upper Cages and Top Plates for the Sony Burano. It features 1/4"-20 and 3/8"-16 mounting holes with ARRI anti-twist divots in standard spacing. M4 x 20mm threaded holes are built-in on multiple sides for attaching the Rod Bracket (15mm LW) or other ARRI M4 accessories.

This MID49 15mm LWS Rod Bracket features 60mm rod spacing and can attach to the back of Baseline 15mm LW baseplates, allowing you to add rear support. Spring-loaded locking levers clamp optional rods and can be tightened or loosened without fully rotating if accessories interfere with the rods. M4 screws 20mm apart can be used instead to attach to products like an optional ARCA Top Handle and ARCA Top Plate or other devices with standard ARRI standard M4 spacing. M4 x 20mm threaded holes are available on top for adding additional accessories.

This MID49 Baseline 15mm LW Baseplate includes an Arca-type dovetail baseplate featuring integrated 15mm LWS rod clamps, an ARRI-compatible dovetail mounting plate, and an Arca-type dovetail. This assemblage is designed to work with the RED V-RAPTOR camera to provide the correct lens center-to-rod height for cine-style accessories. It also features a top-loading Arca-type dovetail slot that enables mounting either from the top or back. Likewise, the bottom of the platform can mount on the included standard ARRI dovetail rails via a top-loading mechanism or by sliding it on or off from the back.

This MID49 Breakout Side Plate for RED V-RAPTOR mounts on the side of your V-RAPTOR, providing numerous accessory mounting options. The 1/4"-20 and 3/8"-16 threaded holes are surrounded by ARRI-style anti-twist divots, enabling you to use accessories and support arms with or without compatible anti-twist-pins. The plate features recessed cable loops for clean cable management. In addition, an integrated rosette allows you to mount standard ARRI rosette accessories, such as a handgrip on your camera. The plate also has 1/4"-20 threaded holes with matching positions to your RED camera, so you can use third-party, RED-centric accessories.

This MID49 Audio Breakout AB-1 for Select RED, ARRI & Z Cam allows you to use two mics with standard 3-pin XLR outputs and connect them to your camera's audio input. This adapter works with the RED KOMODO-X, V-Raptor, ARRI ALEXA Mini, and Z Cam E-2. The 8" cable adds audio flexibility to your camera setup. Mount it on your camera setup using the captive screw; the rubber pad protects the finish of your rig and helps prevent it from twisting. Please note that this cable is compatible with Z CAM E2 (all models) but may conflict with the CTRL 1 port or COM port due to connector angles.

This pair of 9" long 15mm Rods from MID49 supports optional rod-mounted lens accessories, such as follow focus units, motors, lens lights, and matte boxes. The stainless steel construction makes these rods corrosion resistant. The chamfered ends make it easier to slide your accessories onto the rods.